ar6330d084603tsf

Install center side longitudinal member

Typ ar · temat 63.30 · wersja 0100 · 2018-10-01

Dotyczy: Model 910.6

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 63 Ściana boczna › 63.30 Podłużnica na zewnątrz — Seria 910 (modele 6**)

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.34 Ściana boczna › 35.34.41 Belka/ nadkole — Seria 910 (modele 6**)

AR63.30-D-0846-03TSF

Install center side longitudinal member

000 588 01 84 00 Welder

WS60.00-P-0021K

000 588 02 84 00 Welder

WS60.00-P-0022K

Model

910.6

Additional information can be found in the superordinate service document.

The safety information in the superordinate service document must be observed.

The next steps are shown on the left side of the vehicle in model 910.633 and must be performed in a similar manner on vehicles with damage on the right side of the vehicle.

Install center side longitudinal member

1

Install, fit, and fix in place the longitudinal member (2).


Commercially available devices/tools
Clamping pliers (Standard)



2

The longitudinal member (2) (area B2).



3

The longitudinal member (2) (area B1).



4

Clean weld joints (area B1).


Commercially available devices/tools
Wet and dry vacuum cleaner



5

Remove shavings.


D63.30-A010-05

Install center side longitudinal member

D63.30-A011-09

6

Install center side longitudinal member (1), fit, and fix in place.

Commercially available devices/tools
Clamping pliers (Standard)

7

The longitudinal member (2) (areas C1, C3) and the center side longitudinal member (1) (area C2) .

8

The center side longitudinal member (1) (area E) and longitudinal member (2) (areas D1 and F) .

9

Model 910.621/631/641
The center side longitudinal member (1) (area D2).

10

Clean weld joints (areas D1, E, and F).

Commercially available devices/tools
Wet and dry vacuum cleaner

11

Model 910.621/631/641
Clean weld joints (area D2).

Commercially available devices/tools
Wet and dry vacuum cleaner

12

Remove shavings.

Install center side longitudinal member

D63.30-A013-09

13

Install, fit, and fix in place the longitudinal member (3).

Commercially available devices/tools
Clamping pliers (Standard)

14

The center side longitudinal member (1) (area G) and the longitudinal member (3) (area I) .

15

The longitudinal member (3) (area H).

16

Clean weld joints (area H).

Commercially available devices/tools
Wet and dry vacuum cleaner

Install center side longitudinal member

17

Install, fit. and fix in place vehicle floor (4).


Commercially available devices/tools
Clamping pliers (Standard)



18

Vehicle floor (4) (areas L1, L2, M, N, and O).



19

Model 910.6 (except 910.621/631/641)
Vehicle floor (4) (area L3).


Inert gas weld in intervals and allow to cool down in between.
Heat distortion is reduced as a result.



20

Vehicle floor (4) (area P).



21

Surface-grind inert-gas plug welds (areas L1, L2, M, N and O) and weld seam (area P) on vehicle floor (4).


Commercially available devices/tools
Angular grinder



22

Model 910.6 (except 910.621/631/641)
Grind inert gas plug welds down flat (area L3).


Commercially available devices/tools
Angular grinder



23

Remove shavings.


Commercially available devices/tools
Wet and dry vacuum cleaner


D63.30-A012-06

Powiązane dokumenty