1 | Rear sidewall |
D63.10-1771-06
Caution | Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. | |
Topical note | General information on body repair | ||
| Remove | ||
1 | Remove detachable parts in area to be repaired | ||
2 | Cover all detachable parts remaining in vehicle with fire-resistant welding protection blanket | ||
3 | Separate rear side wall (1) | ||
Zinc dust paint suitable for spot welding | |||
4 | Prepare rear side wall (1) for installation | ||
Zinc dust paint suitable for spot welding | |||
| Install | ||
Danger | The high voltage used for electric welding presents a lethal hazard. Risk of explosion from welding in areas close to highly inflammable materials. Risk of injury from weld splatter and UV-light when welding. Risk of poisoning from inhaling welding gases | Use insulating mats. Wear protective clothing, safety glasses and a protective mask. Remove highly inflammable materials from the hazard area. Use air extraction system. | |
5 | Install rear side wall (1) | ||
Topical note | Measures for preventing damage to vehicles or components when performing electric welding work | ||
| 000 588 02 84 00 Welder | ||
6 | Clean weld joints and sheet metal flanges with rotary wire brush | ||
7 | Clean repair area | ||
Danger | Risk of explosion caused by paint vapors igniting. Risk of poisoning caused by inhaling paint vapors. | No smoking! No open fire! Use respiratory protection, protective clothing, gloves, safety glasses and protective skin cream. Ensure that the area is well ventilated. | |
8 | Prime repair area using primer filler | Use only primer filler approved by Daimler AG: | |
9 | Seal seam following repairs | ||
Danger | Risk of explosion caused by paint vapors igniting. Risk of poisoning caused by inhaling paint vapors. | No smoking! No open fire! Use respiratory protection, protective clothing, gloves, safety glasses and protective skin cream. Ensure that the area is well ventilated. | |
10 | Paint repair areas and adjacent surfaces | Use only paints approved by Daimler AG: | |
11 | Add cavity preserving agent | ||
12 | Remove welding protection blankets | ||
13 | Install all detachable body components in area to be repaired |
Powiązane dokumenty
- ah0000n000501a Zabezpieczenia zapobiegające uszkodzeniom pojazdu lub jego elementów podczas spawania elektrycznego
- ah6000n000101a Ogólne wskazówki dotyczące napraw nadwozia
- ar6310d002901f
- ar6310d002902f
- ar6310d002903f
- ar9710d4000f
- ar9720d1500f
- as0000z000701a Zagrożenie dla życia przez wysokie napięcie przy spawaniu elektrycznym. Niebezpieczeństwo wybuchu podczas spawania w pobliżu materiałów łatwopalnych. Niebezpieczeństwo urazu na skutek odprysków przy spawaniu oraz promieniowania u
- as0000z001701a Niebezpieczeństwo obrażeńo elementy pojazdu o ostrych krawędziach.
- as9800z000201a Niebezpieczeństwo eksplozji w wyniku zapalenia się oparów lakierniczych. Niebezpieczeństwo zatrucia na skutek wdychania oparów lakierniczych.
- ws6000p0022k