ar4610p0900a

Removing and installing steering lock

Typ ar · temat 46.10 · wersja 0108 · 2000-01-24

Dotyczy: MODEL 129, 140

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 2 Podwozie › 46 Układ kierowniczy › 46.10 Koło kierownicy, osłona, wał kolumny kierowniczej, zamek stacyjki — Seria 129 · Seria 140

EinPAS 22 Układ kierowniczy › 22.15 Wspomaganie kierownicy › 22.15.40 Kierownica/kolumna kierownicy/osłona kolumny kierownicy/zamek kierownicy — Seria 129 · Seria 140

AR46.10-P-0900A

Removing and installing steering lock

24.10.94

MODEL 129, 140

Removing and installing steering lock
Removing and installing steering lock
Removing and installing steering lock

P46.10-0284-01

P46.10-0283-01

P46.10-0301-01

Removing and installing steering lock
Removing and installing steering lock
Removing and installing steering lock

P46.10-0285-01

P46.10-0282-01

P46.10-0286-01

Removing, installing

1

Remove cover below instrument panel

Model 129

ra68001290150x

Model 140

ra68001400150x

2

Remove instrument cluster

Models 129, 202, 208, 210

AR54.30-P-6015EA

Model 140

ra54001406015x

3

Unscrew trim ring (36a) from dashboard using claw-type wrench (020)

*210589000700

4.1

Remove coil for transponder from lock cylinder

Vehicles with drive authorization system stage 2a (DAS 2a) as of 6/96

Models 129, 140

AR80.30-P-4515CA

5

Turn lock cylinder to position "1"

6

Press in safety catch (36f) of connector (S2/1x1) and pull off slide in direction of lock cylinder

Steering lock, 3rd version

Model 129

BT46.10-P-0002-01A

7.1

Detach control cable (37a) for parking lock on protective sleeve (36d)

With automatic transmission only

Bolted version up to 03/95

With bayonet lock up to 04/95

With slide lock (model 140.076 as of 04/95)

*BA46.10-P-1001-04A

8

Press in locking pin on steering lock part (37) and remove protective sleeve (36d) with starter switch and lock cylinder

The shift shaft (37f) in the steering lock part (37) must not be twisted out of position"1" otherwise the steering lock engages

U-bolt for assembling protective sleeve on steering lock

WF58.50-P-4610-01A

9

Unscrew nut from fastening bolt (37m)

10

Pull out fastening bolt (37m) upwards

To pull out the fastening bolt, release the jacket tube at the upper retaining bolts if necessary and lower carefully
With steering lock engaged and installed:

The fastening bolt can only be withdrawn from the jacket tube by destroying the steering lock

Upper bolt, jacket tube to body

*BA46.10-P-1002-03A

11

Withdraw steering lock part (37) from the jacket tube

With steering lock engaged and removed, see:

Unlock steering lock

AR46.10-P-0900-01A

Note steering lock versions:

Steering lock, 2nd version

BT46.10-P-0001-01A

Steering lock, 3rd version

BT46.10-P-0002-01A

Steering lock, 4th version

BT46.10-P-0003-01A

Steering lock, 5th version

BT46.10-P-0004-01A

Steering lock, 6th version

BT46.10-P-0005-01A

12

Install in the reverse order

Jacket tube

Number

Designation

Model 129

Model 140

BA46.10-P-1002-03A

Upper bolt, jacket tube to body

Nm

20

20

Steering lock

Number

Designation

Model 129

Model 140

BA46.10-P-1001-04A

Cable of parking lock interlock to steering lock

Nm

5

5

Removing and installing steering lock

210 589 00 07 00

Claw-type wrench for ignition / starter switch trim ring

Powiązane dokumenty