P46.10-0284-01
P46.10-0283-01
P46.10-0301-01
P46.10-0285-01
P46.10-0282-01
P46.10-0286-01
| Removing, installing | ||
1 | Remove cover below instrument panel | Model 129 | |
Model 140 | |||
2 | Remove instrument cluster | Models 129, 202, 208, 210 | |
Model 140 | |||
3 | Unscrew trim ring (36a) from dashboard using claw-type wrench (020) | | |
4.1 | Remove coil for transponder from lock cylinder | Vehicles with drive authorization system stage 2a (DAS 2a) as of 6/96 | |
Models 129, 140 | |||
5 | Turn lock cylinder to position "1" | ||
6 | Press in safety catch (36f) of connector (S2/1x1) and pull off slide in direction of lock cylinder | ||
| Steering lock, 3rd version | Model 129 | |
7.1 | Detach control cable (37a) for parking lock on protective sleeve (36d) | With automatic transmission only Bolted version up to 03/95 With bayonet lock up to 04/95 With slide lock (model 140.076 as of 04/95) | |
8 | Press in locking pin on steering lock part (37) and remove protective sleeve (36d) with starter switch and lock cylinder | The shift shaft (37f) in the steering lock part (37) must not be twisted out of position"1" otherwise the steering lock engages | |
| U-bolt for assembling protective sleeve on steering lock | ||
9 | Unscrew nut from fastening bolt (37m) | ||
10 | Pull out fastening bolt (37m) upwards | To pull out the fastening bolt, release the jacket tube at the upper retaining bolts if necessary and lower carefully The fastening bolt can only be withdrawn from the jacket tube by destroying the steering lock | |
Upper bolt, jacket tube to body | |||
11 | Withdraw steering lock part (37) from the jacket tube | With steering lock engaged and removed, see: | |
Unlock steering lock | |||
Note steering lock versions: | |||
| Steering lock, 2nd version | ||
| Steering lock, 3rd version | ||
| Steering lock, 4th version | ||
| Steering lock, 5th version | ||
| Steering lock, 6th version | ||
12 | Install in the reverse order |
Jacket tube
Steering lock
Number | Designation | Model 129 | Model 140 | ||
BA46.10-P-1001-04A | Cable of parking lock interlock to steering lock | Nm | 5 | 5 | |
210 589 00 07 00
Claw-type wrench for ignition / starter switch trim ring
Referenced documents
- ar4610p090001a Unlock steering lock
- ar5430p6015ea Removing and installing instrument cluster
- ar8030p4515ca Removing and installing transponder coil
- bt4610p000101a 2nd version of steering lock
- bt4610p000201a 3rd version of steering lock
- bt4610p000301a 4th version of steering lock
- bt4610p000401a 5th version of steering lock
- bt4610p000501a 6th version of steering lock
- ra54001406015x 6015 - Removal and installation of the instrument cluster Model 140
- ra68001290150x 0150 - Removal and installation of the cover under the instrument panel A. Driver's side cover, B. Passenger's side cover Model 129
- ra68001400150x 0150 - Removal and installation of the cover below the instrument panel A. Driver's side, B. Passenger's side Model 140
- wf5850p461001a U-bolt for assembling protective sleeve on steering lock