P46.10-0300-01
P46.10-0296-01
P46.10-0298-01
P46.10-0299-01
| Removing | ||
Before removal | If lock cylinder/key is notchy or jamming, spray lock cylinder with lock cylinder grease | If it is not possible to eliminate the complaint, replace lock cylinder and key in constant use. | |
| Grease | ||
1 | Remove steering lock, remove protective sleeve (36d) from steering lock part | ||
2 | Press in pressure stud (arrow) and pull ignition/starter switch (S2/1) with locking shaft out of the protective sleeve (36d) | The lock cylinder (36) can only be replaced together with the protective sleeve (36d) and cap (36b). On vehicles with automatic transmission a parking lock valve (37h) is also mounted on the ignition/starter switch (S2/1). | |
| Installing | ||
3 | Turn lock cylinder (36) to position "1" with the key (36c) and press into a new protective sleeve (36d) until the locking detent (36h) locks in position | Since 09/94 only parts from the 4th version of the steering lock are supplied as parts (increased anti-theft protection) | |
| Steering lock, 2nd version | ||
| Steering lock, 4th version | ||
4 | Remove key | ||
5 | Push cap (36b) onto the protective sleeve until the snap ring (36g) locks in position | The cap (36b) is now permanently attached to the protective sleeve (36d) | |
6 | Press the ignition/starter switch (S2/1) with locking shaft into the protective sleeve (36d) until it locks in position |
Repair materials
Number | Designation | Order number |
BR00.45-Z-1079-06A | Grease, lock cylinder, 25 ml spray can | A 001 989 26 51 10 |
Powiązane dokumenty
- ar4610p0900a
- bt4610p000101a Stacyjka - 2. wersja
- bt4610p000301a Stacyjka - 4. wersja