ar4210d0301f

Removing and installing brake fluid reservoir

Typ ar · temat 42.10 · wersja 0100 · 2013-07-26

Dotyczy: MODEL 909

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 2 Podwozie › 42 Układ hydrauliczny i mechanizm hamulców › 42.10 Hamulec główny — Seria 909

EinPAS 21 Hamulce/instalacja podciśnieniowa/układ sprężonego powietrza › 21.15 Hamulec zasadniczy/instalacja podciśnieniowa › 21.15.30 Pompa hamulcowa/zbiornik/serwo hamulcowe — Seria 909

AR42.10-D-0301F

Removing and installing brake fluid reservoir

24.06.2013

MODEL

909

Removing and installing brake fluid reservoir

D42.10-1175-08

1

Reservoir

3

Hydraulic hose

5

Seal

2

Electrical connector

4

Screw

Danger !

Risk of accident when commissioning the vehicle due to a lack of braking effect when the service brake is operated for the first time after repair work.

Before starting engine, actuate brake pedal several times until pressure is built up and maintained in the brake system.

AS42.50-Z-0002-01A

Danger !

Risk of poisoning from swallowing brake fluid. Risk of injury from skin and eye contact with brake fluid

Only pour brake fluid into suitable and appropriately marked containers. Wear protective clothing and eye protection when handling brake fluid.

AS42.50-Z-0001-01A

Notes on repairs to brake system

AH42.00-P-0003-01A

Brake fluid notes

AH42.50-P-0001-01A

Remove/install

1

Extract brake fluid from the reservoir (1)

2

Disconnect electrical connector (2)

3

Loosen disposable clip at hydraulic hose (3)

Installation: Disposable clip must be replaced.

4

Disconnect hydraulic hose (3) and withdraw from reservoir (1)

Clamp

*000589403700

5

Unscrew screw/bolt (4) and remove reservoir (1)

When reusing, clean the reservoir (1) with spirit.
Close off connection holes at master brake cylinder with suitable stop plugs.

Installation: Replace seals (5) at reservoir (1).

Record plug

*129589009100

6

Install in the reverse order

7

Bleed brake system

AR42.10-D-0010F

8

Correct fluid level in the reservoir (1)

AP42.50-D-4210F

9

Check brake system for leaks

AR42.10-D-0100-01F

Removing and installing brake fluid reservoir
Removing and installing brake fluid reservoir

129 589 00 91 00

Record plug

000 589 40 37 00

Clamp

Powiązane dokumenty