01 | Filling and bleeding device |
D42.10-1180-05
Danger ! | Risk of accident when commissioning the vehicle due to a lack of braking effect when the service brake is operated for the first time after repair work. | Before starting the engine, actuate brake pedal several times until pressure is built up and maintained in the brake system. | |
Danger ! | Risk of poisoning from swallowing brake fluid. Risk of injury from skin and eye contact with brake fluid | Only pour brake fluid into suitable and appropriately marked containers. Wear protective clothing and eye protection when handling brake fluid. | |
| Notes on bleeding brake system | ||
| Brake fluid notes | ||
| Notes on repairs to brake system | ||
1.1 | Bleed brake system using filler/bleeder unit (01) | If the brake system is to be bled using the filler/bleeder unit (01). | |
| Brake fluids (DOT 4 plus) | ||
| 000 588 01 82 00 Filling unit | ||
If the brake is still too soft after bleeding (air in system), repeat bleeding operation with additional pumping of pedal. Refer to: | |||
| |||
Bleed brake system using filler/bleeder unit (01) and manually support | |||
Bleed screw to brake caliper | |||
Model 909.6 | |||
1.2 | Bleed brake system manually | If the brake system must be bled manually. | |
| Brake fluids (DOT 4 plus) | ||
If the brake is still too soft after bleeding (air in system), repeat bleeding operation manually with diagnostic system. Refer to: | |||
| |||
Manually bleed brake system with diagnostic system | |||
Model 909.6 | |||
Bleed screw to brake caliper | |||
1.3 | Bleed brake system using filler/bleeder unit (01) and manually support | If the brake system is to be bled using the filler/bleeder unit (01) and manually supported. | |
| Brake fluids (DOT 4 plus) | ||
| 000 588 01 82 00 Filling unit | ||
If the brake is still too soft after bleeding (air in system), repeat the bleeding operation using the diagnostic system, filler/bleeder unit (01) and additional manual support. Refer to: | |||
| |||
Bleed brake system using diagnostic system, filler/bleeder unit (01) and additional manual support | |||
Model 909.6 | |||
Bleed screw to brake caliper | |||
1.4 | Manually bleed brake system with diagnostic system | If the brake system must be manually bled using the diagnostic system. | |
| Brake fluids (DOT 4 plus) | ||
Model 909.6 | |||
Bleed screw to brake caliper | |||
1.5 | Bleed brake system using diagnostic system, filler/bleeder unit (01) and additional manual support | If the brake system is to be bled using diagnostic system, filler/bleeder unit (01) and additional manual support. | |
| Brake fluids (DOT 4 plus) | ||
| 000 588 01 82 00 Filling unit | ||
Model 909.6 | |||
Bleed screw to brake caliper | |||
2 | Check fluid level in hydraulic fluid reservoir, and correct, if necessary | ||
| |||
3 | Check brake system for leaks |
Powiązane dokumenty
- ah4200p000301a Wskazówki dotyczące napraw układu hamulcowego
- ah4210n000201a Wskazówki dotyczące odpowietrzania układu hamulcowego
- ah4250p000101a Wskazówki dotyczące płynu hamulcowego
- ap4250d4210f Hydrauliczny układ hamulcowy - sprawdzenie, korygowanie poziomu płynu
- ar4210d001003f
- ar4210d001004f
- ar4210d001005f
- ar4210d001011f
- ar4210d001012f
- ar4210d010001f
- as4250z000101a Niebezpieczeństwo zatrucia na skutek połknięcia płynu hamulcowego. Niebezpieczeństwo zranienia wskutek kontaktu skóry i oczu z płynem hamulcowym
- as4250z000201a Niebezpieczeństwo wypadku podczas uruchamiania pojazdu na skutek zaniku działania hamulców przy pierwszym naciśnięciu hamulca zasadniczego po przeprowadzeniu prac naprawczych.
- bb0040p033100a Płyn hamulcowy (DOT 4 plus)
- ws2500p0016b