01 | Filling and bleeding device |
1 | First bleed point, right rear |
2 | Second bleed point, left front |
3 | Third bleed point, left rear |
4 | Fourth bleed point, right front |
D42.10-1177-05
1 | Connect filler/bleeder unit (01) to hydraulic fluid reservoir and open shutoff valve. |
D42.10-0018-01
Bleed primary brake circuit.
2 | Plug breather hose onto bleed valve and open bleed valve. |
Start bleeding procedure at right rear, then left front. |
The bleeding operation is completed once clear brake fluid free of bubbles flows out of the bleeder hose. |
3 | Close the vent valve . |
Bleed secondary brake circuit
4 | Plug breather hose onto bleed valve and open bleed valve. |
Start bleeding procedure at left rear, then right front. |
The bleeding operation is completed once clear brake fluid free of bubbles flows out of the bleeder hose. |
5 | Close the vent valve . |
D42.10-0017-01
6 | Close shutoff valve and disconnect filler/bleeder unit. |
7 | Correct fluid level in hydraulic fluid reservoir. |
Fill in quantity of brake fluid required, use brake fluid in accordance with Specifications for Operating Fluids Sheet 331.0. |
D42.10-0016-01