Perform wheel alignment check · ar4020p0200sr · Mercedes-Benz WIS

AR40.20-P-0200SR

Perform wheel alignment check

28.08.2017

Model

453

	Measure, adjust
1	Correct tire inflation pressure
			AP40.15-P-4061C
2	Carry out initial measurement	 Carry out measurements according to information provided by measuring device manufacturer. Conduct measurements on unladen vehicle. The fuel tank must be at least 90 % filled.
		Front axle camber	*BE40.20-P-1001-06E
		Caster	*BE40.20-P-1002-06E
		Total toe at front axle	*BE40.20-P-1001-07FA
		Rear axle camber	*BE40.20-P-1001-09BA
		Total rear axle toe	*BE40.20-P-1001-10DA
		Drive line angle	*BE40.20-P-1001-21B
3	Adjust front axle toe		AR40.20-P-0323-02SR
		 Jam nut at tie rod	*BA46.40-P-1002-01F
		Total toe at front axle	*BE40.20-P-1001-07FA
4	Carry out final measurement	 The front axle camber and caster are not adjustable. The rear axle camber, total toe and drive line angle are not adjustable.
		Front axle camber	*BE40.20-P-1001-06E
		Caster	*BE40.20-P-1002-06E
		Total toe at front axle	*BE40.20-P-1001-07FA
		Rear axle camber	*BE40.20-P-1001-09BA
		Total rear axle toe	*BE40.20-P-1001-10DA
		Drive line angle	*BE40.20-P-1001-21B
		If, after adjusting the toe on the front axle, the measurement values are out of tolerance:
		
		Repair or replace affected components and repeat measurements.
5	Calibrate steering wheel angle sensor using diagnostic system
			AD00.00-P-2000-06SR

Test and adjustment values for front axle camber/caster

Number	Designation		Model 453
BE40.20-P-1001-06E	Front axle camber	°	-18' (60')

Check values for front axle toe

Number	Designation		Model 453
BE40.20-P-1001-07FA	Total toe at front axle	°	-9´ (15´)

Check values for rear axle camber

Number	Designation		Model 453
BE40.20-P-1001-09BA	Rear axle camber	°	-72' (30')

Check values for rear axle toe

Number	Designation		Model 453.3/4	Model 453.0
BE40.20-P-1001-10DA	Total rear axle toe	°	15' (25')	10' (25')

Test values for drive line angle

Number	Designation		Model 453
BE40.20-P-1001-21B	Drive line angle	°	0´ (45´)

Test and adjustment values for front axle camber/caster

Number	Designation		Model 453
BE40.20-P-1002-06E	Caster	°	7° 40' (1°)

 Tie rod

Number	Designation		Model 453
BA46.40-P-1002-01F	Jam nut at tie rod	Nm	53