S35.20-2500-06
1 Semi-trailing arm
2 Base plate for supporting the support of the parking brake brake shoes
3 Mounting bolt for base plate
4 Bearing
5 Circlip
6 Wheel hub
7 Brake disk
8 Thrust piece with ABS rpm sensor
9 Thrust piece without ABS rpm sensor
10 Bolt for wheel hub nut M22
11 Wheel hub nut M22
12 Brake disk mounting bolt M8 x 16
| Remove/install | ||
1 | Remove wheel | Before lifting the vehicle, loosen the wheel hub nut | |
2 | Unscrew mounting nut (11) of wheel hub (6) and bolt (10). | Counterhold bolt (10) backwards. | |
| |||
3 | Remove brake disk (7) | ||
4 | Detach thrust piece (8) or (9) from wheel hub | On vehicles with ABS, part (8) | |
5 | Detach wheel hub (6) from lower control arm and remove the half track of the bearing | ||
Scissors-type puller | |||
| |||
| |||
6 | Detach ball bearing (4) from semi-trailing arm (1) | Removed bearings should not be reused and must be replaced by new | |
| |||
| Check | ||
7 | Check parking brake brake shoes for faultless condition | Before installing the brake disk Clean dirt off surface | |
8 | Install in the reverse sequence |
Hub
638 589 01 43 00
124 589 05 43 00
638 589 00 15 00
Assembly tool
Drift
Extraction and insertion tool