ar3520s011502a

Removing and installing the bearing from the rear wheel hub

Typ ar · temat 35.20 · wersja 0103 · 1999-05-26

Dotyczy: MODEL 638

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 2 Podwozie › 35 Oś tylna › 35.20 Prowadnica koła, piasta — Seria 638

EinPAS 17 Zespół przeniesienia napędu/ oś › 17.51 Oś tylna › 17.51.41 Wspornik piasty koła/zwrotnica/piasta/łożysko koła — Seria 638

AR35.20-S-0115-02A

Removing and installing the bearing from the rear wheel hub

Removing and installing the bearing from the rear wheel hub

124 589 05 43 00

Puller and installation tool

Removing and installing the bearing from the rear wheel hub

S35.20-0010-01

Removing

1 Remove the side stop elastic brake

Removing and installing the bearing from the rear wheel hub

S35.20-2500-01

2 Remove the bearing from the hub of the rocker arm

It is pulled out

When the bearing is removed it can no longer be used, so a new one must be installed

Removing and installing the bearing from the rear wheel hub

S35.20-2501-01

Installing

3 Install the bearing onto the rocker arm

Do not apply force to the inner race of the bearing, the bearing could be damaged. It is pressed in .

4 Install the side stop elastic brake.