ar3220s0230e

Remove/install rear spring

Typ ar · temat 32.20 · wersja 0200 · 2020-03-19

Dotyczy: Model 447, 448

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 2 Podwozie › 32 Zawieszenie › 32.20 Zawieszenie stalowe, drążek skrętny, Niveaumat — Seria 447 · Seria 448

EinPAS 20 Zawieszenie › 20.16 Zawieszenie › 20.16.30 Resor/resor pneumatyczny/amortyzator/kolumna zawieszenia — Seria 447 · Seria 448

AR32.20-S-0230E

Remove/install rear spring

06.03.2020

Model

447, 448

Modification notes

05.03.2020

Method extended

Operation step 2

Remove/install rear spring

1

Tensioning device

2

Spring

3

Rubber stopper

S32.20-4502-11

Danger

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

Warning

Risk of injury caused by pinching or crushing when working on springs or spring bodies that are under tension

Use only approved tensioning devices; additionally screen off hazardous area if necessary. Check special tools for damage and proper operation (visual inspection). Wear protective gloves.

AS00.00-Z-0001-01A

Warning

Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.

Wear protective gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

Warning

Risk of burn injuries, suffocation and poisoning when working on the exhaust system and the components connected to it. Risk of suffocation and risk of poisoning caused by inhalation of gaseous and solid components of the exhaust. Risk of poisoning caused by skin contact with solid components of the exhaust.

Wear protective clothing and safety glasses. Use the extraction system. Move people out of the hazard area.

AS49.00-Z-0001-01A

Remove/install

1

Lift vehicle with lifting platform.

AR00.60-S-1000E

2

Remove rear muffler.

When removing right spring (2).

Model 447 with engine 274, 651
Model 447 with engine 654.9
Model 448 with engine 274

AR49.10-S-4823E

3

Install tensioning device (1) with clamping plates.

Tensioning device

*203589013100

Clamping plates

*639589006300

4

Remove spring (2).

Installation: Ensure correct position of the spring (2).

5

Remove rubber stops (3) from spring (2).

Installation: Check rubber stops (3) for wear and damage.

If damage or wear is identified,

Replace rubber stops (3).

6

Install in the reverse order.

Remove/install rear spring
Remove/install rear spring

639 589 00 63 00

Clamping plates

203 589 01 31 00

Tensioning device

Powiązane dokumenty