ar4910s4823e

Remove/install rear muffler

Typ ar · temat 49.10 · wersja 0202 · 2018-12-10

Dotyczy: Engine 274 in model 448 Engine 274, 651 in model 447 Engine 654.9 in model 447

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 1 Silnik › 49 Układ wydechowy, układ oczyszczania spalin › 49.10 Rury wydechowe, katalizator, tłumik układu wydechowego — Seria 447 · Seria 448 · Seria 651 · Seria 654 (modele 9**)

EinPAS 15 Silnik › 15.40 Układ wydechowy/ układ oczyszczania spalin › 15.40.41 Kolektor/rura/tłumik/elastyczny przewód wydechowy — Seria 447 · Seria 448 · Seria 651 · Seria 654 (modele 9**)

Dotyczy też silników/skrzyń biegów: 274 ***

AR49.10-S-4823E

Remove/install rear muffler

23.11.2018

Engine

274 in model 448

Engine

274, 651 in model 447

Engine

654.9 in model 447

Remove/install rear muffler

Shown on model 447 with ENGINE 651

1

Clip

2

Elastomer bearing

3

Rear muffler

S49.10-4535-05

Warning

Risk of burn injuries, suffocation and poisoning when working on the exhaust system and the components connected to it. Risk of suffocation and risk of poisoning caused by inhalation of gaseous and solid components of the exhaust. Risk of poisoning caused by skin contact with solid components of the exhaust.

Wear protective clothing and safety glasses. Use the extraction system. Move people out of the hazard area.

AS49.00-Z-0001-01A

Warning

Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.

Wear protective gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

Remove

1

Raise vehicle.

AR00.60-S-1000E

2

Release clamp (1).

3

Remove rear muffler (3) from the elastomer bearings (2) and remove downward.

Clean

4

Remove combustion and corrosion residues from the separating point.

Check

5

Check rear muffler (2) and clamp (1) for damage.

If damage is identified,

replace rear muffler (2).

6

Check elastomer bearings (2) for damage.

If damage is identified,

replace elastomer bearings (2).

Install

7

Coat the elastomer bearings (2) with lubricant.

Lubricant, rubber assembly 1 l

*BR00.45-Z-1010-06A

8

Install and align rear muffler (3).

9

Tighten clamp (1).

Engine 651 in model 447
Engine 654.9 in model 447Clamp, rear muffler to center muffler

*BA49.10-N-1006-02E

Engine 274 in model 447, 448Clamp, rear muffler to center muffler

*BA49.10-N-1004-02F

Check

10

Check installation position and unobstructed movement of the rear muffler (3) and correct if necessary.

Warning

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

11

Check exhaust system for leaks with the engine running.

12

Lower vehicle.

AR00.60-S-1000E

Exhaust system

Number

Designation

Engine 274 in model 447, 448

BA49.10-N-1004-02F

Clamp, rear muffler to center muffler

Nm

45

Exhaust system

Number

Designation

Engine 654.9 in model 447

Engine 651 in model 447

BA49.10-N-1006-02E

Clamp, rear muffler to center muffler

Nm

45

45

Repair materials

Number

Designation

Order number

BR00.45-Z-1010-06A

Lubricant, rubber assembly 1 l

A 000 989 03 67

Powiązane dokumenty