Remove/install pedal assembly

AR29.10-P-0300RR

28.5.03

MODEL 452.3## /4## 2#

P29.10-2056-06

1 Connector

2 Bolts

3 Nut

4 Pin

5 Nuts

6 Bracket

7 Nuts

8 Brake pedal bracket

9 Accelerator pedal module

S9/1 Stop lamp switch

	Remove/install
1	Remove jacket tube		AR46.10-P-0400RR
2	Disconnect plug (1) from accelerator pedal module (9)	 Pay attention to catch lugs.
3	Unscrew bolts (2) and nut (3) on accelerator pedal module (9)		*BA29.10-P-1003-02C
4	Remove accelerator pedal module (9)
5	Remove stop lamp switch (S9/1)		AR42.10-P-0040RR
6	Unscrew nuts (5) from bracket (6) of accelerator pedal module (9) and remove bracket (6)		*BA29.10-P-1005-02C
7	Detach bolt (4) from brake pedal bracket (8)	 Installation: Grease bolt.
8	Unscrew nuts (7) from brake pedal bracket (8)		*BA43.10-P-1001-01D
9	Remove brake pedal bracket (8)
10	Install in the reverse order

 Pedals, bearing bracket

Number	Designation		Models 452.3/4 Right-hand drive


BA29.10-P-1003-02C	Bolt, accelerator pedal module to bracket	Nm	9
BA29.10-P-1005-02C	Nut, bracket to body	Nm	3.7

 Pneumatic brake booster

Number	Designation		Model 452.3/4


BA43.10-P-1001-01D	Nut, brake pedal bearing bracket to brake booster	Nm	20