Adjusting shift

AR26.60-S-6420A

Adjusting shift

12.7.96

ENGINE 111.948 /950 /978 /980, 601.942 /970, 611.980 in MODEL 638 except CODE (G40) Automatic transmission

S26.60-3016-06

1 Lock nut

2 Adjusting nut

3 Lock nut

4 Lock nut

5 Adjusting nut

6 Lock nut

A Adjustment dimension for gate shift cable

B Adjustment dimension for gear shift cable

	Adjusting
1	Remove ashtray housing		AR82.00-S-9999A
2	Shift transmission to neutral	 The transmission must remain in neutral for the entire duration of the adjustment procedure.
3	Check and adjust dimension (A)	 To adjust, slacken lock nuts (1, 3) and turn the adjusting nut (2) to set the adjustment dimension (A).	*BE26.60-N-1002-01A
4	Tighten lock nuts (1, 3)	 The shift cable and ball joint must not be twisted.
5	Check and adjust dimension (B)	 To adjust, slacken lock nuts (4, 6) and turn the adjusting nut (5) to set the adjustment dimension (B).	*BE26.60-N-1003-01A
6	Tighten lock nuts (4, 6)	 The shift cable and ball joint must not be twisted.
7	Shift through all gears	 If the shift lever knocks against the trim or if the gears cannot be shifted accurately 
		Repeat steps 2 to 7
8	Adjust shift mechanism cover		AR26.60-S-6430A
9	Install ashtray housing		AR82.00-S-9999A

Test and adjustment values for shift

Number	Designation		Model 638.014/034/ 064/074/114/134/164/174 without code G40


BE26.60-N-1002-01A	Adjustment dimension "A" for gate shift cable	mm	146.5-148
		See figure	AR26.60-S-6420A
BE26.60-N-1003-01A	Adjustment dimension "B" for gear shift cable	mm	170.5-172
		See figure	AR26.60-S-6420A