ar2640p2470mcc

Remove and install front section of transmission housing

Typ ar · temat 26.40 · wersja 0102 · 2016-11-11

Dotyczy: Transmission 717.48 in model 451.3/4 except code 494 (US version)

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 2 Podwozie › 26 Mechaniczna skrzynia biegów › 26.40 Obudowa — Seria 451 (modele 3**, 4**)

EinPAS 17 Zespół przeniesienia napędu/ oś › 17.20 Skrzynia biegów › 17.20.30 Obudowa/pokrywa/miska olejowa/zawieszenie — Seria 451 (modele 3**, 4**)

Dotyczy też silników/skrzyń biegów: 717 48*

AR26.40-P-2470MCC

Remove and install front section of transmission housing

03.11.2016

Transmission	717.48 in model 451.3/4
	except code 494 (US version)

Remove and install front section of transmission housing

P26.40-2108-09

1	Rear section of transmission housing		3	Central clutch release bearing
2	Front section of transmission housing		4	Screw/bolt

Remove and install front section of transmission housing

1	Rear section of transmission housing
5	Magnet

P26.40-2111-11

 	Remove/install
1	Drain transmission oil	Transmission 717.4 in model 451.3/4 except code 494 (US version)	AR26.00-P-0200MCC
2	Remove transmission	Transmission 717.4 in model 451.3/4 with engine 132.9	AR26.10-P-0020MCC
		Transmission 717.4 in model 451.3/4 with engine 660.9	AR26.10-P-0020MCD
3	Remove the clutch actuator		AR25.20-P-0125MCC
4	Remove central clutch release bearing (3)		AR25.20-P-0180MCC
5	Remove screws/bolts (4)	 Bolt, front section of transmission housing to rear section of transmission housing	*BA26.40-P-1005-01D
6	Undo front section of transmission housing (2) using suitable tool from rear section of transmission housing (1) and carefully remove	 When removing, ensure that the sealing surfaces on front section of transmission housing (2) and on rear section of transmission housing (1) do not get damaged. Otherwise, leaktightness of the transmission cannot be ensured.
		 Pay attention to guide sleeves in rear section of transmission housing (1).
		 Installation: Clean sealing surfaces and apply sealant to sealing surface on rear section of transmission housing (1).
		Loctite 5971	*BR00.45-Z-1092-01A
7	Remove magnet (5) from rear section of transmission housing (1)	 Installation: Clean the magnet (5) and its surrounding area in the rear section of transmission housing (1) before installing.
8	Install in the reverse order

 Housing

Number	Designation		Transmission 717.480/481/482/483/484 in model 451
BA26.40-P-1005-01D	Bolt, front section of transmission housing to rear section of transmission housing	Nm	15

Repair materials

Number	Designation	Order number
BR00.45-Z-1092-01A	Loctite 5971	Henkel AG & Co. KGaA www.loctite.de

Powiązane dokumenty