ar2040s6721b

Removing and installing fan temperature sensor

Typ ar · temat 20.40 · wersja 0102 · 1997-10-07

Dotyczy: ENGINE 601 in MODEL 638

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 1 Silnik › 20 Chłodzenie silnika › 20.40 Wentylator, sprzęgło wentylatora — Seria 601 · Seria 638

EinPAS 15 Silnik › 15.25 Układ chłodzenia silnika › 15.25.12 Czujnik/ przełącznik/ wiązka przewodów — Seria 601 · Seria 638

AR20.40-S-6721B

Removing and installing fan temperature sensor

14.6.95

ENGINE 601 in MODEL 638

Removing and installing fan temperature sensor

S20.40-2001-05

1 Stopper retainer

2 Stopper retainer (code H06)

B20 Fan temperature switch

B20.1 Fan temperature switch terminal

B 45 Anti-boiling protection switch (code H06)

B 45.1 Anti-boiling protection switch terminal (Code H06)

Removing and installing

1

Disconnect the battery

AR54.10-S-0005A

Danger!

Risk of injury to skin and eyes from scalding from hot coolant which splashes out. Risk of poisoning from swallowing coolant.

Do not open the cooling system unless the coolant temperature is below 90 °C. Open cap slowly and allow the pressure to release. Do not pour coolant into containers for drinks.

Wear protective gloves, protective clothes, and eye protection.

AS20.00-Z-0001-01A

2

Drain coolant in radiator

AP20.00-D-2080A

3

Loosen the fan temperature switch terminal (B20.1) from the temperature switch (B20)

4

Unscrew the fan temperature switch (B20)

Assembly: Replace the stopper retainer

5

Loosen the anti-boiling protection switch terminal (B45.1) from the anti-boiling protection switch (B45)

with air conditioning (code H06)

6

Unscrew the anti-boiling protection switch

with air conditioning (code H06)
Assembly: Replace stopper retainer (2)

7

Assembly in reverse order

8

Check leaktightness

Powiązane dokumenty