ar2040s0012pd

Remove/install fan shroud

Typ ar · temat 20.40 · wersja 0200 · 2018-12-10

Dotyczy: Model 470, 471 with engine 699

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 1 Silnik › 20 Chłodzenie silnika › 20.40 Wentylator, sprzęgło wentylatora — Seria 470 · Seria 471

EinPAS 15 Silnik › 15.25 Układ chłodzenia silnika › 15.25.45 Wentylator/sprzęgło wentylatora/napęd wentylatora — Seria 470 · Seria 471

Dotyczy też silników/skrzyń biegów: 699 ***

AR20.40-S-0012PD

Remove/install fan shroud

20.11.2018

Model

470, 471 with engine 699

Modification notes

15.11.2018

Method extended

Operation steps 3, 4

Remove/install fan shroud

S20.40-4524-09

1

Fan shroud

6

Lines

9

Retaining clips

4

Screw

7

Line

10

Cover

5

Bracket

8

Screw

Warning

Risk of injury to skin and eyes suffering scalding from contact with hot coolantspray. Risk of poisoning from swallowing coolant.

Do not open cooling system unless coolant temperature is below 90 °C. Open cap slowly and release the pressure. Do not pour coolant into beverage containers.
Wear protective gloves, protective clothing and safety glasses.

AS20.00-Z-0001-01A

Warning

Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.

Wear protective gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

Topical note

Notes on avoiding damage through contamination and foreign objects

AH00.00-P-5000-01A

Remove/install

1

Remove expansion reservoir.

AR20.30-S-4949PD

2

Remove the fan.

AR20.40-S-5614PD

3

Remove cover from the radiator grille.

AR88.40-S-4001-02P

4

Remove cover (10).

To do so, remove retaining clips (9).

Installation: Check the retaining clips (9) for damage.

Depending on the findings,

replace damaged retaining clips (9).

5

Unscrew bolt (4).

M5

*BA00.10-N-1001-01A

6

Remove screw (8).

M5

*BA00.10-N-1001-01A

7

Position line (7) outside of working area.

8

Unclip lines (6).

9

Remove fan cowl (1).

To do this, unclip fan shroud (1) from brackets (5), and remove upwards.

10

Install in the reverse order.

Headless screws/bolts: screws/bolts and nuts, coarse-pitch thread

Number

Designation

8.8

10.9

BA00.10-N-1001-01A

M5

Galvanized

Nm

6

8

Phosphated

Nm

5

7

Headless screws/bolts: screws/bolts and nuts, coarse-pitch thread

Number

Designation

12.9

BA00.10-N-1001-01A

M5

Galvanized

Nm

9

Phosphated

Nm

9

Powiązane dokumenty