P20.20-2007-06
1 Radiator feed line
2 Radiator drain
3 Automatic transmission oil line
4 Automatic transmission oil line
5 Overflow tank connector hose
6 Securing bolts
7 Bracket, radiator to radiator crossmember
8 Fastening for radiator on frame
01 Transmission oil line connection fittings
| Remove/install | ||
1 | Open engine hood and move to vertical position | ||
2 | Remove underride guard | ||
Danger! | Risk of injury to skin and eyes caused by scalding from contact with hot coolant spray. Risk of poisoning caused by swallowing coolant. | Do not open cooling system unless coolant temperature is below 90°C. Open cap slowly and release the pressure. Do not pour coolant into beverage containers. Wear protective gloves, protective clothing and safety glasses. | |
3 | Drain coolant | ||
| Notes on coolant | All engines | |
4 | Remove fan shroud | ||
5 | Remove viscous fan clutch | ||
6 | Loosen coolant feed (1) and return hose (2) on radiator | ||
7 | Loosen A/T oil lines (3) and (4) on cooler | Close automatic oil lines. | |
| |||
Close off transmission cooler | |||
| |||
8 | Remove mounting bolts for charge air cooler condenser assembly on radiator (6) | | |
9 | Remove upper mounting bolts for radiator(7) on the left and right | Radiator mounting bar on radiator crossmember. | |
10 | Remove nuts, rubber bumper (8) to frame console | | |
11 | Remove rubber bumper (8) on radiator | | |
12 | Detach coolant overflow hose (5) on radiator | ||
13 | Remove cooler upwards | ||
14 | Install in the reverse order | ||
Danger! | Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the engine as it is running | Secure vehicle to prevent it from moving by itself. | |
15 | Engine cooling system - inspect fluid level, adjust to correct level | ||
16 | Inspect cooling system for leaks | ||
17 | Check oil level in automatic transmission and correct if necessary. |
Radiator, coolant hoses
Number | Designation | Engine | |
BA20.20-P-1002-01B | Bracket for A/C condenser/ | Nm | 9 |
BA20.20-P-1003-01B | Radiator mounting bar | Nm | 7 |
BA20.20-P-1004-01B | ATF line, automatic transmission to radiator | Nm | 20 |
BA20.20-P-1005-01B | Rubber bumper on radiator | Nm | 13 |
BA20.20-P-1006-01B | Nut, rubber bumper to frame console | Nm | 11 |
Set of stop plugs
129 589 00 91 00
Powiązane dokumenty
- ah2000n208001a Wskazówki dotyczące płynu chłodzącego
- ap2000p2011g
- ar2000p1010ha
- ar2000p1010ha Sprawdzanie szczelności układu chłodzenia
- ar2000p1142gg
- ar2020p386501ha Zamykanie przewodów olejowych układu automatycznego
- ar2040p5660gv
- ar2040p6800gv
- ar2700p0100a Sprawdzanie, w razie potrzeby korygowanie poziomu oleju w automatycznej skrzyni biegów
- ar8840p1000gg
- ar8840p1000gg Pokrywa komory silnika otwieranie, ustawianie w pionie, zamykanie
- as0000z000501a Niebezpieczeństwo wypadku na skutek samoczynnego ruszenia przy pracującym silniku. Niebezpieczeństwo obrażeń na skutek zmiażdżenia lub poparzenia przy wykonywaniu czynności podczas rozruchu lub przy pracującym silniku.
- as2000z000101a Niebezpieczeństwo zranienia skóry i oczu przez poparzenie wytryskującym, gorącympłynem chłodzącym. Niebezpieczeństwo zatrucia na skutek połknięcia płynu chłodzącego