ar2020d3871tsm

Remove/install radiator unit

Typ ar · temat 20.20 · wersja 0100 · 2020-04-30

Dotyczy: Engine 654.9 in model 907.1/2/6

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 1 Silnik › 20 Chłodzenie silnika › 20.20 Chłodnica, przewody elastyczne płynu chłodzącego — Seria 654 (modele 9**) · Seria 907 (modele 1**, 2**, 6**)

EinPAS 15 Silnik › 15.25 Układ chłodzenia silnika › 15.25.31 Chłodnica silnika — Seria 654 (modele 9**) · Seria 907 (modele 1**, 2**, 6**)

AR20.20-D-3871TSM

Remove/install radiator unit

15.04.2020

Engine

654.9 in model 907.1/2/6

Remove/install radiator unit

D20.20-A013-79

Shown with CODE HH4 (THERMOTRONIC automatic air conditioning)

1

Radiator unit

2

Refrigerant condenser

3

Air duct segments

Remove/install radiator unit

D20.20-A014-79

Shown with CODE HH4 (THERMOTRONIC automatic air conditioning)

1

Radiator unit

4

Assembly carrier

5

Holder

Warning

Risk of injury to skin and eyes suffering scalding from contact with hot coolantspray. Risk of poisoning from swallowing coolant.

Do not open cooling system unless coolant temperature is below 90 °C. Open cap slowly and release the pressure. Do not pour coolant into beverage containers.
Wear protective gloves, protective clothing and safety glasses.

AS20.00-Z-0001-01A

Caution

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.

AS00.00-Z-0017-01A

Topical note

Notes on avoiding damage through contamination and foreign objects

AH00.00-P-5000-01A

Remove/install

1

Remove fan unit.

AR20.40-D-5050TSM

2

Remove front bumper.

AR88.20-D-2000TS

3

Remove air duct segments (3) of the cooler unit (1).

The air duct segments (3) are attached to the cooler unit (1) in multiple places.

4

Unhook the left and right catch hooks (arrows) on the cooler unit (1), remove the condenser (2), and secure against dropping down.

Engine 654.9 in model 907.1/2/6
with code HH4 (THERMOTRONIC automatic climate control)
Engine 654.9 in model 907.1/2/6
with code HH9 (Air conditioner, automatic heater control)

Installation: Guide the condenser (2) into the upper guides on the cooler unit (1).

5

Remove the holders (5).

6

Press the cooler unit (1) in the direction of the arrow (arrow A) and remove upwards (arrow B) out of the assembly carrier (4).

Aid of helper required.

Installation: Be sure that the cooler unit (1) is seated correctly in the guides in the assembly carrier (4).

7

Install in the reverse order.

Powiązane dokumenty