ar2020d3865tsm

Remove/install radiator

Typ ar · temat 20.20 · wersja 0100 · 2020-04-30

Dotyczy: Engine 654.9 in model 907.1/2/6

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 1 Silnik › 20 Chłodzenie silnika › 20.20 Chłodnica, przewody elastyczne płynu chłodzącego — Seria 654 (modele 9**) · Seria 907 (modele 1**, 2**, 6**)

EinPAS 15 Silnik › 15.25 Układ chłodzenia silnika › 15.25.31 Chłodnica silnika — Seria 654 (modele 9**) · Seria 907 (modele 1**, 2**, 6**)

AR20.20-D-3865TSM

Remove/install radiator

15.04.2020

Engine

654.9 in model 907.1/2/6

Remove/install radiator

D20.20-A009-79

1.1

Radiator

3.2

Cooler holder right

4

Screw

3.1

Cooler holder left

Remove/install radiator

1.1

Radiator

1.2

Low-pressure cooler

3.1

Cooler holder left

3.2

Cooler holder right

D20.20-A010-76

Warning

Risk of injury to skin and eyes suffering scalding from contact with hot coolantspray. Risk of poisoning from swallowing coolant.

Do not open cooling system unless coolant temperature is below 90 °C. Open cap slowly and release the pressure. Do not pour coolant into beverage containers.
Wear protective gloves, protective clothing and safety glasses.

AS20.00-Z-0001-01A

Caution

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.

AS00.00-Z-0017-01A

Remove/install

1

Remove radiator unit.

AR20.20-D-3871TSM

2

Remove screws (4).

3

Guide cooler (1.1) out of guides in left cooler holder (3.1) and right cooler holder (3.2) and remove.

4

Remove low-temperature cooler (1.2) from left cooler holder (3.1) and right cooler holder (3.2).

5

Install in the reverse order.

Powiązane dokumenty