ar2020d3865tsc

Remove/install radiator

Typ ar · temat 20.20 · wersja 0100 · 2018-12-10

Dotyczy: Engine 274 in model 907

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 1 Silnik › 20 Chłodzenie silnika › 20.20 Chłodnica, przewody elastyczne płynu chłodzącego — Seria 907

EinPAS 15 Silnik › 15.25 Układ chłodzenia silnika › 15.25.31 Chłodnica silnika — Seria 907

Dotyczy też silników/skrzyń biegów: 274 ***

AR20.20-D-3865TSC

Remove/install radiator

17.10.2018

Engine

274 in model 907

Remove/install radiator

D20.20-A000-08

1

Radiator

3

Coolant expansion reservoir

2

Coolant hose

4

Retaining clips

Danger

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

Warning

Risk of injury to skin and eyes suffering scalding from contact with hot coolantspray. Risk of poisoning from swallowing coolant.

Do not open cooling system unless coolant temperature is below 90 °C. Open cap slowly and release the pressure. Do not pour coolant into beverage containers.
Wear protective gloves, protective clothing and safety glasses.

AS20.00-Z-0001-01A

Warning

Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.

Wear protective gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

Caution

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.

AS00.00-Z-0017-01A

Topical note

Notes on coolant

AH20.00-N-2080-01A

Topical note

Notes on avoiding damage through contamination and foreign objects

AH00.00-P-5000-01A

Remove/install

1

Remove the condenser.

AR83.30-D-6540TSC

2

Remove charge air cooler.

AR09.41-D-6817TSC

3

Remove coolant hose (2).

AR20.20-S-3865-09S

4

Remove front crossmember.

AR62.30-D-0007TS

5

Pull coolant expansion reservoir (3) out of the bracket and place to one side.

6

Release retaining clips (4) with a suitable tool (arrows).

7

Tilt cooler (1) in the direction of the engine (arrow A) and remove upward.

8

Install in the reverse order.

Check

9

Check engine cooling system for leak tightness.

AR20.00-D-1010TSC

Powiązane dokumenty