S09.41-4606-08
1 | Bracket | 5 | Electrical line | 9 | Retaining bolt | ||
2 | Electrical connection | 6 | Retaining clamp | B28/24 | Intake manifold pressure sensor | ||
3 | Electrical line | 7 | Electrical line | N3/34 | ME-SFI [ME] control unit | ||
4 | Retaining clamp | 8 | Retaining clamp |
10 | Electrical connection |
11 | Screw/bolt |
12 | Sealing ring |
B28/24 | Intake manifold pressure sensor |
S09.41-4605-03
| Remove/install | ||
1 | Remove air filter housing | ||
2 | Remove electrical connection (2) from bracket (1) | ||
3 | Disconnect electrical connection (2) | ||
4 | Remove electrical line circuit (3) together with retaining clamps (4) from bracket (1) | ||
5 | Remove electrical line circuit (5) together with retaining clamps (6) from bracket (1) | ||
6 | Remove electrical line circuit (7) together with retaining clamps (8) from bracket (1) | ||
7 | Remove ME-SFI [ME] control unit (N3/34) | ||
8 | Remove bracket (1) | To do this remove bracket (1) upwards from the retaining bolt (9). | |
9 | Disconnect electrical connection (10) | ||
10 | Remove intake manifold pressure sensor (B28/24) | To do so, remove screw/bolt (11). | |
Installation: Replace sealing ring (12); ensure correct seating of the sealing ring (12). | |||
11 | Install in the reverse order | ||
12 | Read out fault memory with diagnostic system | ||
| |||
Clear existing errors. | |||
| Check | ||
Danger ! | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
13 | Check for leaktightness with engine running | Visual inspection only. |
Powiązane dokumenty
- ad0000s200004e
- ar0708s7008eg
- ar0910s1150eg
- as0000z000501a Niebezpieczeństwo wypadku na skutek samoczynnego ruszenia przy pracującym silniku. Niebezpieczeństwo obrażeń na skutek zmiażdżenia lub poparzenia przy wykonywaniu czynności podczas rozruchu lub przy pracującym silniku.