ar0708p7013oid

Remove/install engine management control unit (MCM)

Typ ar · temat 07.08 · wersja 0100 · 2019-01-02

Dotyczy: Engine 656 in model 167

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 1 Silnik › 07 Przygotowanie mieszanki › 07.08 Moduły sterujące — Seria 167 · Seria 656

EinPAS 15 Silnik › 15.45 Sterowanie pracą silnika › 15.45.11 Moduł sterujący/ przekaźnik — Seria 167 · Seria 656

AR07.08-P-7013OID

Remove/install engine management control unit (MCM)

18.12.2018

Engine

656 in model 167

Remove/install engine management control unit (MCM)

2

Bolts

3

Electrical connectors

4

Cover

N3/9

CDI control unit

P07.08-2380-06

Warning

Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.

Wear protective gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Topical note

Notes on avoiding damage through contamination and foreign objects

AH00.00-P-5000-01A

Remove/install

1

Start control unit replacement with vehicle diagnosis system.

When replacing the CDI control unit (N3/9).

AD00.00-P-2000-06ME

2

Switch off ignition and store transmitter key outside of transmitter range (min. 2 m).

3

Remove cover (4).

AR01.10-P-2405OID

4

Remove screws/bolts (2).

5

Remove the CVDI control unit   (N3/9).

Installation: Check condition and correct seat of seal in air filter housing, replace and/or correctly position if necessary.

6

Release and disconnect electrical connectors (3).

7

Install in the reverse order.

8

Read out and delete fault memory.

AD00.00-P-2000-06ME

Check

Warning

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

9

Carry out engine test run and check engine for proper leaktightness and leaktightness.

Powiązane dokumenty