1 | Screw |
2 | Heat shield |
3 | Screw |
4 | Spacer |
5 | Crankshaft position sensor |
S07.04-4752-76
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
Topical note | Notes on avoiding damage through contamination and foreign objects | ||
| Remove/install | ||
1 | Remove front left fender liner. | ||
2 | Unscrew bolt (1). | ||
3 | Remove heat shield (2). | ||
4 | Separate electrical connector at crankshaft position sensor (5). | ||
5 | Remove screw (3) of crankshaft position sensor (5). | Screw/bolt, crankshaft position sensor to crankcase | |
6 | Remove crankshaft position sensor (5) with spacer (4) and seal opening with suitable stop plug. | Record plug | |
7 | Change spacer (4). | If crankshaft position sensor (5) is replaced. | |
8 | Install in the reverse order. | ||
9 | Read out and delete fault memory. | If crankshaft position sensor (5) is replaced. | |
| |||
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
10 | Perform engine test run. |
129 589 00 91 00
Record plug
Powiązane dokumenty
- ad0000s200006p
- ah0000p500001a Wskazówki dotyczące zapobiegania uszkodzeniom na skutek zabrudzeń i ciał obcych
- ah5400p000101a Wskazówki dotyczące zapobiegania uszkodzeniom elementów elektronicznych na skutek rozładowania potencjału elektrostatycznego
- ar8810s1301p
- as0000z000501a Niebezpieczeństwo wypadku na skutek samoczynnego ruszenia przy pracującym silniku. Niebezpieczeństwo obrażeń na skutek zmiażdżenia lub poparzenia przy wykonywaniu czynności podczas rozruchu lub przy pracującym silniku.