S07.04-4750-09
1 | Differential pressure sensor | 3 | Nut | 5 | Pressure lines | ||
2 | Electrical connector | 4 | Pressure hoses | 6 | Right front brake line |
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
Topical note | Notes on avoiding damage through contamination and foreign objects | ||
| Remove | ||
1 | Remove right front wheel. | ||
2 | Remove right fender liner. | ||
3 | Mark pressure hoses (4) in relation to pressure lines (5). | ||
4 | Disconnect electrical connection (2). | ||
5 | Unscrew nut (3). | ||
6 | Remove pressure hoses (4) from pressure lines (5) and seal openings with suitable stop plugs. | Pliers for click clamps | |
Record plug | |||
7 | Remove differential pressure sensor (1) with pressure hoses (4). | The differential pressure sensor (1) can only be removed and replaced together with the pressure hoses (4). | |
| Install | ||
8 | Position differential pressure sensor (1) in installation location. | ||
9 | Attach pressure hoses (4) to pressure lines (5) free of tension. | Observe markings and replace click clamps. | |
Pliers for click clamps | |||
10 | Tighten nut (3). | ||
11 | Connect electrical connection (2). | ||
12 | Read out and delete fault memory and initialize differential pressure sensor (1). | When replacing the differential pressure sensor (1). | |
| |||
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
13 | Perform engine test run and check differential pressure sensor (1) and pressure hoses (4) in terms of leak tightness. | ||
14 | Install right fender liner. | ||
15 | Mount right front wheel. |
129 589 00 91 00
Record plug
171 589 00 37 00
Pliers for click clamps
Powiązane dokumenty
- ad0000s200006p
- ah0000p500001a Wskazówki dotyczące zapobiegania uszkodzeniom na skutek zabrudzeń i ciał obcych
- ah5400p000101a Wskazówki dotyczące zapobiegania uszkodzeniom elementów elektronicznych na skutek rozładowania potencjału elektrostatycznego
- ar4010s1100p
- ar8810s1301p
- as0000z000501a Niebezpieczeństwo wypadku na skutek samoczynnego ruszenia przy pracującym silniku. Niebezpieczeństwo obrażeń na skutek zmiażdżenia lub poparzenia przy wykonywaniu czynności podczas rozruchu lub przy pracującym silniku.