ar0704s0025ef

Remove/install differential pressure sensor

Typ ar · temat 07.04 · wersja 0200 · 2019-08-29

Dotyczy: Model 447 with engine 622

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 1 Silnik › 07 Przygotowanie mieszanki › 07.04 Czujniki — Seria 447 · Seria 622

EinPAS 15 Silnik › 15.40 Układ wydechowy/ układ oczyszczania spalin › 15.40.12 Czujnik/ przełącznik/ wiązka przewodów — Seria 447 · Seria 622

AR07.04-S-0025EF

Remove/install differential pressure sensor

13.08.2019

Model

447 with engine 622

Modification notes

08.08.2019

New operation step variant.

Operation steps 6.1, 6.2.

Remove/install differential pressure sensor

S07.04-4585-09

Shown on engine 622.9

1

Pressure hoses

3

Electrical connector

5

Nut

2

Pressure lines

4

Electrical connector

B28/25

Diesel particulate filter differential pressure sensor

Remove/install differential pressure sensor

S07.04-A063-78

Shown on engine 622.8

1

Pressure hoses

6

Screw

2

Pressure lines

B28/25

Diesel particulate filter differential pressure sensor

4

Electrical connector

Caution

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.

AS00.00-Z-0017-01A

Warning

Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.

Wear protective gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

Topical note

Notes on avoiding damage through contamination and foreign objects

AH00.00-P-5000-01A

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Remove/install

1

Remove charge air hose upstream of charge air cooler.

Model 447 with engine 622.9

AR09.41-S-8621EF

2

Raise vehicle.

AR00.60-S-1000E

3

Remove pressure hoses (1) from pressure lines (2).


Only the pressure hoses (1) on the pressure lines (2) of the diesel particulate filter many be unfastened.
Hairline cracks will occur otherwise on the DPF differential pressure sensor (B28/25) through loosening the pressure hoses (1) on the DPF differential pressure sensor (B28/25).

Installation: Observe assignment of pressure hoses (1), replace clamps.

4

Unclip electrical connector (3) and swivel out of working area.

Model 447 with engine 622.9

5

Release and disconnect electrical connector (4).

6.1

Remove nut (5) and remove diesel particulate filter differential pressure sensor (B28/25).

Model 447 with engine 622.9

6.2

Unscrew screw (6) and remove diesel particulate filter differential pressure sensor (B28/25).

Model 447 with engine 622.8

7

Install in the reverse order.

Check

Warning

Risk of burn injuries, suffocation and poisoning when working on the exhaust system and the components connected to it. Risk of suffocation and risk of poisoning caused by inhalation of gaseous and solid components of the exhaust. Risk of poisoning caused by skin contact with solid components of the exhaust.

Wear protective clothing and safety glasses. Use the extraction system. Move people out of the hazard area.

AS49.00-Z-0001-01A

Warning

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

8

Carry out an engine test run; check engine for leak tightness while doing so.

Concluding tasks

9

Connect vehicle diagnosis system, read out fault memory and clear if necessary.

AD00.00-S-2000-04E

Powiązane dokumenty