AR07.03-P-1450MCC | Remove fuel distributor with injection valves | 21.8.07 |
ENGINE 132.9 in MODEL 451.3 /4
P07.03-2215-08
1 Fuel distributor
2 Engine wiring harness
3 Retaining clip
4 Retaining clip
8 Fuel pipe
9 Supports
10 Bolt
5 Electrical connectors
6 Hose clamp
7 Fuel hose
| Remove/install | ||
Danger! | Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel and risk of injury to eyes and skin caused by contact with fuel | No fire, sparks, open flames or smoking. Wear protective clothing when handling fuel. | |
1 | Remove interior flap above engine | Installation: Only install interior flap over engine after the leak test. | |
2 | Unclip engine wiring harness (2) from retaining clips (3, 4) | ||
3 | Disconnect electrical connectors (5) | ||
4 | Unclip fuel line (8) from mounts (9) | ||
5 | Detach clamp (6) and remove fuel hose (7) from fuel distributor (1) | Collect the escaping fuel in a suitable container. Use suitable plugs to seal the openings. | |
Installation: Replace clamp (6). | |||
6 | Unscrew bolts (10) on fuel distributor (1) | | |
| |||
7 | Remove fuel distributor (1) together with fuel injection valves | Installation: Replace sealing rings and wet slightly with engine oil for easier assembly. | |
8 | Remove fuel injection valves | When replacing fuel distributor (1). | |
9 | Install in the reverse order | ||
10 | Read out fault memory, erase if necessary | ||
| Connect STAR DIAGNOSIS and read out fault memory | ||
Danger! | Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the engine as it is running | Secure vehicle to prevent it from moving by itself. | |
11 | Conduct engine test run and check for leaktightness of fuel system in the area of the fuel distributor (1) |
Fuel distributor
Powiązane dokumenty
- ad0000p200004mcc
- ar0703p6522mcc
- ar8840p110003mcc
- as0000z000501a Niebezpieczeństwo wypadku na skutek samoczynnego ruszenia przy pracującym silniku. Niebezpieczeństwo obrażeń na skutek zmiażdżenia lub poparzenia przy wykonywaniu czynności podczas rozruchu lub przy pracującym silniku.
- as4700z000101a Niebezpieczeństwo wybuchu wskutek zapalenia, niebezpieczeństwo zatrucia wskutek wdychania i połknięcia paliwa oraz niebezpieczeństwo obrażeń wskutek kontaktu skóry i oczu z paliwem.