P07.03-2235-07
1 Fuel distributor
2 Anti-twist lock
3 Sealing ring
4 Sealing ring
Y62/3 Cylinder 3 fuel injection valve
Y62/1 Cylinder 1 fuel injection valve
Y62/2 Cylinder 2 fuel injection valve
| Remove/install | ||
1 | Remove fuel distributor (1) together with fuel injectors (Y62/1, Y62/2, Y62/3) | ||
2 | Unclip anti-twist locks (2) at fuel injectors (Y62/1, Y62/2, Y62/3) | Installation: The anti-twist lock (2) must engage in the respective slot (arrow) on the fuel injection valve (Y62/1, Y62/2, Y62/3) | |
3 | Pull fuel injection valves (Y62/1, Y62/2, Y62/3) out of fuel distributor (1) | Installation: Replace seal rings (3, 4) on fuel injection valves (Y62/1, Y62/2, Y62/3) and wet with engine oil before installation. | |
4 | Install in the reverse order |