S05.30-4505-08
1 | Compensating element | 2 | Roller-type cam follower | 3 | Clamp |
| Remove/install | ||
1 | Remove cylinder head cover | ||
2 | Remove roller cam follower (2) together with the compensating element (1) | When removing several compensating elements (1) make sure that roller-type cam follower (2) with compensating elements (1), which were not replaced, are reinstalled at the previous fitting point. If required, mark roller cam follower (2) and compensating elements (1) relative to each other. | |
Installation: Oil roller cam follower (2) and compensating elements (1). | |||
3 | Disconnect compensating elements (1) for roller-type cam follower (2) | To do this remove clips (3). | |
4 | Install in the reverse order |