ar0500s2011ef

Remove/install hydraulic valve clearance compensating elements

Type ar · topic 05.00 · version 0100 · 2015-02-25

Applies to: MODEL 447 with ENGINE 622

Where it sits

Function group 1 Engine › 05 Engine timing › 05.00 General — Series 447 · Series 622

EinPAS 15 Engine › 15.17 Engine timing › 15.17.30 Valve train — Series 447 · Series 622

AR05.00-S-2011EF

Remove/install hydraulic valve clearance compensating elements

5.2.15

MODEL

447 with ENGINE 622

Remove/install hydraulic valve clearance compensating elements

S05.30-4505-08

1

Compensating element

2

Roller-type cam follower

3

Clamp

Remove/install

1

Remove cylinder head cover

AR01.20-S-5014EF

2

Remove roller cam follower (2) together with the compensating element (1)

When removing several compensating elements (1) make sure that roller-type cam follower (2) with compensating elements (1), which were not replaced, are reinstalled at the previous fitting point. If required, mark roller cam follower (2) and compensating elements (1) relative to each other.

Installation: Oil roller cam follower (2) and compensating elements (1).

3

Disconnect compensating elements (1) for roller-type cam follower (2)

To do this remove clips (3).

4

Install in the reverse order

Referenced documents