ar0500d2016tsv

Remove/install hydraulic valve play compensation elements on left cylinder head

Typ ar · temat 05.00 · wersja 0100 · 2019-01-07

Dotyczy: Engine 642 in model 907

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 1 Silnik › 05 Sterowanie pracą silnika › 05.00 Informacje ogólne — Seria 907

EinPAS 15 Silnik › 15.17 Rozrząd silnika › 15.17.30 Rozrząd zaworowy — Seria 907

Dotyczy też silników/skrzyń biegów: 642 ***

AR05.00-D-2016TSV

Remove/install hydraulic valve play compensation elements on left cylinder head

13.09.2018

Engine

642 in model 907

Remove/install hydraulic valve play compensation elements on left cylinder head

1

Roller-type cam follower

2

Compensating element

3

Clamp

P05.00-2048-02

Caution

Risk of injury to skin and eyes due to handling of engine oil. Risk of poisoning caused by swallowing engine oil

Wear protective gloves, protective clothing and safety glasses.
Do not fill engine oil into beverage containers.

AS18.00-Z-0001-01A

Remove/install

1

Remove camshafts of the left cylinder bank.

AR05.20-D-6993TSV

2

Remove respective compensating element (2) with associated roller-type rocker arm (1).


Do not use a magnet. The slide surfaces of the compensating element (2) and the roller-type rocker arm (1) would magnetize themselves.
In this way the smallest possible iron chips can gather together. This can lead to damage to the compensating element (2) and camshaft.

If new compensating elements (2) are not installed,

reinstall compensating elements (2) at the previously installed location.

If necessary,

mark roller-type rocker arm (1) relative to the associated compensating element (2).

3

Remove clamps (3).

4

Remove compensating element (2) from the roller-type rocker arm (1).

5

Install in the reverse order.

Powiązane dokumenty