Remove/install retaining lock for crankshaft/ring gear

AR03.30-P-5000SR

Remove/install retaining lock for crankshaft/ring gear

21.07.2014

ENGINE

281 in MODEL 453

Shown on TRANSMISSION 700.12

1

Crankcase upper section

2

Crankcase lower section

3

Screw/bolt

4

Screw/bolt

5

Hole

6

Hole

7

Retaining lock

8

Starter ring gear



Remove

1.1

Remove manual transmission

ENGINE 281 in MODEL 453 with TRANSMISSION 700.12

AR26.10-P-0020SR

1.2

Remove dual clutch transmission

ENGINE 281 in MODEL 453 with TRANSMISSION 700.41

AR27.10-P-0502SR



Install

2

Lay retaining lock (7) on crankcase upper section (1) and crankcase lower section (2) and engage on starter ring gear (8)

 Retaining lock

*102589014000

3

Tighten down retaining lock (7) onto bore (5) using screw/bolt (3) and onto bore (6) using screw/bolt (4)

 Tighten screw/bolts (3, 4) finger-tight.



Remove

4

Unscrew screw/bolt (4)

5

Remove screw/bolt (3) and remove retaining lock (7)



Install

6.1

Install manual transmission

ENGINE 281 in MODEL 453 with TRANSMISSION 700.12

AR26.10-P-0020SR

6.2

Install DKG

ENGINE 281 in MODEL 453 with TRANSMISSION 700.41

AR27.10-P-0502SR