S01.10-2003-09
1 Connector bag
2 Coating
3 Cable terminal terminal 30
4 Protector tube
5 Starter set of cables
6 Battery cable terminal 30
7 Generator set of cables
B72.1 Plug-in connection speed sensor
D2 Glow system relay
D2.2 Plug-in connection glowplugs
G2 Battery
M35.1 Plug-in connection Tempomat (Code MD9)
X42 Plug-in connection coolant temperature sensor (with PLA)
X91 Separation point terminal 30
X97 Plug-in connection vehicle/engine set of cables
X120 Plug-in connection coolant temperature sensor and ELR
X130 Plug-in connection vehicle/engine set of cables (code H06)
| Disconnecting, connecting | ||
1 | Disconnect the battery (G2) | ||
2 | Open the connector bag (1) in the windscreen-wiper water tank, withdraw the electrical plug-in connections and disconnect the cable-holder (arrow) in the windscreen-wiper water tank | ||
3.1 | Disconnect (2 pins) the plug-in connection of the coolant temperature sensor (X42) | In engines with PLA | |
3.2 | Disconnect (6 pins) the plug-in connection of the coolant temperature sensor and RER (X42) | In engines with ELR | |
4 | Disconnect (8 pins) the plug-in connections vehicle/engine set of cables (X97) | ||
5 | Disconnect (8 pins) the plug-in connection vehicle/engine set of cables (X130) | With air conditioning (code H06) | |
6 | Disconnect (8 pins) the plug-in connection Tempomat (M35.1) | With Tempomat (code MD9) | |
7 | Disconnect (2 pins) the plug-in connection speed sensor (B72.1) | with speedometer | |
8 | Remove the coating (2) | ||
9 | Disconnect (4 pins) the plug-in connection sparkplugs of the glow system time relay (D2) | ||
10 | Disconnect the terminal 30 (3) from the glow system time relay (D2) | ||
11 | Disconnect the cable-holder (arrows) from the protector tube (4) and withdraw the protector tube (4) | ||
12 | Disconnect the battery/starter/generator terminal 30 separation point (X91) | The starter (5) and generator (7) set of cables remain with the engine | |
13 | Installation in reverse order |