ap4015i4060b

Correcting tire inflation pressures, including spare

Typ ap · temat 40.15 · wersja 0102 · 2007-04-25

Dotyczy: MODEL 684.482

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 2 Podwozie › 40 Koła, pomiary podwozia › 40.15 Ciśnienie w oponach i jego monitorowanie — Seria 684 (modele 482)

EinPAS 20 Zawieszenie › 20.30 Koło/ opona › 20.30.30 Koło/ opona/ koło zapasowe — Seria 684 (modele 482)

AP40.15-I-4060B

Correcting tire inflation pressures, including spare

31.10.00

MODEL 684.482

Correcting tire inflation pressures, including spare

A Tire inflation pressure correct

B Tire inflation pressure too low

C Tire inflation pressure too high

T40.10-0001-03

Inspect

Tires - General information

All models

AH40.10-N-1020-01A

1

Refer to the tire pressure table for tire inflation pressures

See Operating Instructions

When the tire pressure is checked in workshops, ensure that the tire pressure changes approximately 0.1 bar for each 10°C change in air temperature, particularly in the winter, when the air temperature in the tires has risen (after some time) to the temperature of the workshop.

Example:

Room temperature = 20°C

Ambient temperature = 0°C

Adjust tire pressure to the specified tire inflation pressure +0.2 bar.

AP40.15-I-4060-01B

2

Unscrew valve stem caps

3

Check and correct tire inflation pressures, including spare wheel

Also inspect the inner tire of twin tires. If necessary, install valve extension.

Correct the spare tire to the maximum tire inflation pressure required for the vehicle.

4

Screw the valve stem caps back on

Powiązane dokumenty