Model | 447.6 |
with code EN7 (Audio 15) | |
with code F66 (Glove compartement, lockable) | |
except code EV6 (Pre-installation Becker MAP PILOT) | |
except code ME0 (Electric motor 85 kW) | |
Model | 447.7 |
with code EN7 (Audio 15) | |
with code F66 (Glove compartement, lockable) | |
except code EV6 (Pre-installation Becker MAP PILOT) | |
except code ME0 (Electric motor 85 kW) | |
except code ME4 (Electric motor 145 kW) |
S82.85-4553-09
1 | Navigation module antenna line | A2/48 | GPS antenna | N41 | Becker® MAP PILOT control unit | ||
2 | Navigation module electrical wiring harness | A28/13 | TMC antenna splitter | N41-1 | Becker® MAP PILOT control unit mount |
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
Topical note | Notes on carrying out repair work in the vehicle interior | ||
| Remove | ||
1 | Remove trim from left A-pillar. | ||
| |||
2 | Remove speaker in center instrument panel. | ||
| |||
Do not disconnect electrical wiring plugs. | |||
3 | Remove radio (Audio) (N87/2). | ||
| |||
4 | Remove glove compartment. | ||
| |||
| Install | ||
5 | Retrofit Becker® MAP PILOT control unit (N41) with Becker® MAP PILOT control unit mount (N41-1). | ||
The release pin for removing the Becker® MAP PILOT control unit (N41) is to be handed out to the customer. | |||
6 | Retrofit TMC antenna splitter (A28/13). | ||
7 | Retrofit navigation module antenna line (1). | ||
8 | Retrofit GPS antenna (A2/48). | ||
9 | Retrofit navigation module electrical wiring harness (2). | ||
| Assignment of right footwell firewall fuse and relay module | Model 447.6/7 except code XM0 (Facelift) | |
| Assignment of right footwell firewall fuse and relay module | Model 447.6/7 with code XM0 (Facelift) | |
Wiring harness repair kit, basic | |||
10 | Install glove compartment. | ||
| |||
11 | Install radio (audio) (N87/2). | ||
| |||
12 | Install speaker in center instrument panel. | ||
| |||
13 | Install trim on left A-pillar. | ||
| |||
14 | Supplement special equipment in Vehicle Documentation (VeDoc). | Designation of the respective special equipment: code E1N (Becker MAP PILOT). | |
15 | Perform SCN coding on radio (Audio) (N87/2). | ||
| |||
Under the "Control unit adaptations" menu item follow the instructions for "SCN coding". | |||
16 | Perform SCN coding of instrument cluster (IC) control unit (A1/1). | ||
| |||
Under the "Control unit adaptations" menu item follow the instructions for "SCN coding". | |||
| Check | ||
17 | Perform function test. | See operator's manual for navigation unit. |
000 589 13 99 00
Wiring harness repair kit, basic
Powiązane dokumenty
- ah5400p000101a Wskazówki dotyczące zapobiegania uszkodzeniom elementów elektronicznych na skutek rozładowania potencjału elektrostatycznego
- ah6800n000101s Wskazówki dotyczące wykonywania prac naprawczych we wnętrzu pojazdu
- an8285s000201e
- an8285s000202e
- an8285s000203e
- an8285s000204e
- an8285s200004e
- ar5421s0015e Kodowanie SCN modułów sterujących
- ar6810s1400e
- ar6830s4050e
- ar8260s7502e
- ar8262s7833e
- gf5415s125639tra
- gf5415s125639trf