an8285s000201e

Retrofit navigation module

Typ an · temat 82.85 · wersja 0100 · 2015-06-03

Dotyczy: Model 447.6/7 with code EN7 (Audio 15) with code F66 (Glove compartement, lockable) except code EV6 (Pre-installation Becker MAP PILOT)

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 82 Układ elektryczny, nadwozie › 82.85 Systemy nawigacyjne i komunikacyjne — Seria 447 (modele 6**, 7**)

EinPAS 31 Komunikacja/ informacja/ rozrywka › 31.55 Nawigacja › 31.55.3 Pofabryczny montaż/przebudowa — Seria 447 (modele 6**, 7**)

AN82.85-S-0002-01E

Retrofit navigation module

Model

447.6/7

with code EN7 (Audio 15)

with code F66 (Glove compartement, lockable)

except code EV6 (Pre-installation Becker MAP PILOT)

Retrofit navigation module

S82.85-4554-09

1

Remove pre-perforated sections (2, 3) from removed glove compartment (1).

The Becker® MAP PILOT control unit mount (N41-1) can then be installed into glove compartment (1).

2

Install Becker® MAP PILOT control unit mount (N41-1) into glove compartment (1) as shown and fasten with included screws/bolts (5).

To do so, route brackets (4) of Becker® MAP PILOT control unit mount (N41-1) through cutouts (arrows) of glove compartment (1).

3

Install Becker® MAP PILOT control unit (N41) into Becker® MAP PILOT control unit mount (N41-1) as shown.

Ensure that Becker® MAP PILOT control unit (N41) engages in Becker® MAP PILOT control unit mount (N41-1).
This prevents Becker® MAP PILOT control unit (N41) from falling out.

To do so, remove discharge protection film of rechargeable battery in Becker® MAP PILOT control unit (N41).
See manufacturer information in included operator's manual.