S82.85-4555-09
1 | Fasten TMC antenna splitter (A28/13) to instrument panel crossmember as shown. |
To do so, screw screws/bolts (1) included in parts kit into the existing holes (arrows). |
The plugs for the connections (2, 3) are mounted after routing the radio antenna line and the navigation module antenna line. |
S82.85-4561-09
2 | Remove plug (7) connected by factory from FM, AM antenna amplifier (A2/18). |
3 | Strap down extended length of electrical line at plug (7) and fasten using cable ties to factory-installed electrical wiring harness. |
4 | Remove connector housing of plug (8) from electrical wiring harness (5) and replace with new connector housing from delivered parts kit. |
Use electrical wiring harness (5) from delivered parts kit. |
5 | Route electrical wiring harness (5) in instrument panel as shown. |
Do not kink electrical wiring harness (5) and ensure it is routed without any chafing. |
6 | Fasten electrical wiring harness (5) in sections using cable ties to factory-installed electrical wiring harness. |
7 | Mount plug (6) of electrical wiring harness (5) to connection (4) of TMC antenna splitter (A28/13). |
8 | Mount plug (8) of electrical wiring harness (5) to FM, AM antenna amplifier (A2/18). |