Model | 447.7 |
with code EN7 (Audio 15) | |
with code JA7 (Blind Spot Monitoring) | |
with code V23 (Interior trim, premium version) | |
with code W50 (Rear-end door, double-wing, 180 degrees without window) | |
except code D57 (Full-width partition wall on C-pillar with window) | |
Model | 447.7 |
with code EN7 (Audio 15) | |
with code JD1 (Digital tachograph) | |
with code V23 (Interior trim, premium version) | |
with code W50 (Rear-end door, double-wing, 180 degrees without window) | |
except code D57 (Full-width partition wall on C-pillar with window) | |
Model | 447.7 |
with code EN7 (Audio 15) | |
with code JV6 (Tachograph pre-installation kit) | |
with code V23 (Interior trim, premium version) | |
with code W50 (Rear-end door, double-wing, 180 degrees without window) | |
except code D57 (Full-width partition wall on C-pillar with window) | |
Model | 447.7 |
with code EN7 (Audio 15) | |
with code JW5 (Lane keeping assist) | |
with code V23 (Interior trim, premium version) | |
with code W50 (Rear-end door, double-wing, 180 degrees without window) | |
except code D57 (Full-width partition wall on C-pillar with window) | |
Model | 447.7 |
with code EN7 (Audio 15) | |
with code LG2 (LED Intelligent Light System) | |
with code V23 (Interior trim, premium version) | |
with code W50 (Rear-end door, double-wing, 180 degrees without window) | |
except code D57 (Full-width partition wall on C-pillar with window) |
S54.65-A002-09
1 | Vehicle interior electrical wiring harness | 3 | Reversing camera bracket | B84/10 | Rear-end door reversing camera (RFK) control unit | ||
2 | Rear-end door electrical wiring harness | 4 | Handle strip |
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
Topical note | Notes on carrying out repair work in the vehicle interior | ||
| Remove | ||
1 | Detach ground line of on-board electrical system battery. | ||
| |||
2 | Remove license plate lamp holder. | ||
| |||
The removed handle strip (4) is no longer required. | |||
3 | Remove rear left side trim in rear passenger compartment. | ||
| |||
4.1 | Remove vehicle tool kit mount. | Model 447.7 with code E28 (Additional battery for retrofit consumers) with code RR6 (Spare wheel with vehicle jack) Model 447.7 with code E28 (Additional battery for retrofit consumers) with code Y36 (Vehicle jack) Model 447.7 with code Q24 (NAFTA trailer crossmember, towing capacity 5000Ibs) with code RR6 (Spare wheel with vehicle jack) Model 447.7 with code Q50 (Trailer hitch with removable ball head) with code RR6 (Spare wheel with vehicle jack) Model 447.7 with code Q50 (Trailer hitch with removable ball head) with code Y36 (Vehicle jack) Model 447.7 with code RR6 (Spare wheel with vehicle jack) with code SB6 (Comfort front passenger seat, swiveling) Model 447.7 with code RR6 (Spare wheel with vehicle jack) with code ZG2 (All-wheel drive, permanent) Model 447.7 with code SB6 (Comfort front passenger seat, swiveling) with code Y36 (Vehicle jack) Model 447.7 with code Y36 (Vehicle jack) with code ZG2 (All-wheel drive, permanent) | |
| |||
4.2 | Remove stowage compartment in right rear passenger compartment. | Model 447.7 except code E28 (Additional battery for retrofit consumers) except code Q50 (Trailer hitch with removable ball head) except code SB6 (Comfort front passenger seat, swiveling) except code ZG2 (All-wheel drive, permanent) | |
| |||
4.3 | Remove rear right side trim in rear passenger compartment. | Model 447.7 with code ZG2 (All-wheel drive, permanent) except code E28 (Additional battery for retrofit consumers) except code RR6 (Spare wheel with vehicle jack) except code SB6 (Comfort front passenger seat, swiveling) except code Y36 (Vehicle jack) | |
| |||
5 | Remove rear-end center-section trim. | ||
| Model 447.7 with code V33 (Passenger compartment floor covering (carpeting)) Model 447.7 with code V41 (Passenger compartment floor covering) | ||
6 | Remove rear bumper. | ||
| |||
7 | Remove door sill from sliding door. | ||
| |||
8 | Remove lower B-pillar trim at right. | ||
| |||
9 | Remove door sill on front passenger side. | ||
| |||
10 | Remove trim in right footwell. | ||
| |||
11 | Remove right cover below instrument panel. | ||
| Model 447.7 with code LC7 (Front footwell illumination) | ||
12 | Remove radio (Audio) (N87/2). | ||
| |||
Do not separate electrical connections. | |||
| Install | ||
13 | Retrofit electrical wiring harness of rear-end door (2). | ||
Commercially available devices/tools | |||
Zinc dust paint suitable for spot welding | |||
14 | Retrofit electrical wiring harness for vehicle interior (1). | ||
| Assignment of right footwell firewall fuse and relay module | Model 447.7 except code XM0 (Facelift) | |
| Assignment of right footwell firewall fuse and relay module | Model 447.7 with code XM0 (Facelift) | |
M8 | |||
Long wedge | |||
15 | Install radio (audio) (N87/2). | ||
| |||
16 | Install right cover below instrument panel. | ||
| Model 447.7 with code LC7 (Front footwell illumination) | ||
17 | Install trim in right footwell. | ||
| |||
18 | Install front passenger side door sill. | ||
| |||
19 | Install lower B-pillar trim at right. | ||
| |||
20 | Install door sill on sliding door. | ||
| |||
21 | Install rear bumper. | ||
| |||
22 | Install rear-end center-section trim. | ||
| Model 447.7 with code V33 (Passenger compartment floor covering (carpeting)) Model 447.7 with code V41 (Passenger compartment floor covering) | ||
23.1 | Install vehicle tool kit mount. | Model 447.7 with code E28 (Additional battery for retrofit consumers) with code RR6 (Spare wheel with vehicle jack) Model 447.7 with code E28 (Additional battery for retrofit consumers) with code Y36 (Vehicle jack) Model 447.7 with code Q24 (NAFTA trailer crossmember, towing capacity 5000Ibs) with code RR6 (Spare wheel with vehicle jack) Model 447.7 with code Q50 (Trailer hitch with removable ball head) with code RR6 (Spare wheel with vehicle jack) Model 447.7 with code Q50 (Trailer hitch with removable ball head) with code Y36 (Vehicle jack) Model 447.7 with code RR6 (Spare wheel with vehicle jack) with code SB6 (Comfort front passenger seat, swiveling) Model 447.7 with code RR6 (Spare wheel with vehicle jack) with code ZG2 (All-wheel drive, permanent) Model 447.7 with code SB6 (Comfort front passenger seat, swiveling) with code Y36 (Vehicle jack) Model 447.7 with code Y36 (Vehicle jack) with code ZG2 (All-wheel drive, permanent) | |
| |||
23.2 | Install stowage compartment in right rear passenger compartment. | Model 447.7 except code E28 (Additional battery for retrofit consumers) except code Q50 (Trailer hitch with removable ball head) except code SB6 (Comfort front passenger seat, swiveling) except code ZG2 (All-wheel drive, permanent) | |
| |||
23.3 | Install rear right side trim in rear passenger compartment. | Model 447.7 with code ZG2 (All-wheel drive, permanent) except code E28 (Additional battery for retrofit consumers) except code RR6 (Spare wheel with vehicle jack) except code SB6 (Comfort front passenger seat, swiveling) except code Y36 (Vehicle jack) | |
| |||
24 | Install rear left side trim in rear passenger compartment. | ||
| |||
25 | Retrofit reversing camera holder (3) on rear-end door reversing camera (RFK) (B84/10) control unit. | To do this, positively mount two-piece reversing camera bracket (3) onto rear-end door reversing camera (RFK) control unit (B84/10). | |
26 | Retrofit rear-end door reversing camera (RFK) control unit (B84/10) in handle strip (4). | For this, clip rear-end door reversing camera (RFK) control unit (B84/10) in handle strip (4) from parts kit. | |
27 | Install license plate lamp holder. | ||
| |||
To do this, install removed left rear-end door license plate lamp (E19/3) and right rear-end door license plate lamp (E19/4) in handle strip (4) from parts kit. | |||
28 | Attach ground line of on-board electrical system battery. | ||
| |||
29 | Supplement special equipment in Vehicle Documentation (VeDoc). | Designation of corresponding special equipment: Code FR8 (Reversing camera). | |
30 | Perform SCN coding on electronic ignition lock (EZS) control unit (N73). | ||
| |||
Under the "Control unit adaptations" menu item follow the instructions for "SCN coding". | |||
Do not yet remove vehicle diagnosis system. | |||
31 | Perform SCN coding on radio (audio) (N87/2). | ||
| |||
Under the "Control unit adaptations" menu item follow the instructions for "SCN coding". | |||
Do not yet remove vehicle diagnosis system. | |||
32 | Perform commissioning on rear-end door reversing camera (RFK) control unit (B84/10). | ||
| Connect STAR DIAGNOSIS and read out fault memory | ||
In the "Control unit adaptations" menu item, follow the "Commission previously-installed control unit" instructions. | |||
33 | Remove vehicle diagnosis system. | ||
| Check | ||
34 | Perform function check on reversing camera. |
115 589 03 59 00
Long wedge
Powiązane dokumenty
- ad0000s200004e
- ah5400p000101a Wskazówki dotyczące zapobiegania uszkodzeniom elementów elektronicznych na skutek rozładowania potencjału elektrostatycznego
- ah6800n000101s Wskazówki dotyczące wykonywania prac naprawczych we wnętrzu pojazdu
- an5465s003009eb
- an5465s003011eb
- ar5410s0003e
- ar5410s0003e
- ar5421s0015e Kodowanie SCN modułów sterujących
- ar6800s0009e
- ar6810s1520e
- ar6830s1206e
- ar6830s1312e
- ar6830s4030e
- ar6830s4100e
- ar6830s4700e
- ar6830s4785e
- ar6830s5020e
- ar7220s1010e
- ar8260s7502e
- ar8820s2200e
- gf5415s125639tra
- gf5415s125639trf