ar7220s1010e

Remove, install license plate lamp bracket

Typ ar · temat 72.20 · wersja 0101 · 2014-08-21

Dotyczy: MODEL 447.6/7 with CODE W50 (Rear-end door, double-wing, 180 degrees without window) MODEL 447.6/7 with CODE W54 (Hinged rear doors, opening to side wall)

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 72 Drzwi › 72.20 Drzwi na ścianie tylnej, drzwi tylne — Seria 447 (modele 6**, 7**)

EinPAS 30 Instalacja oświetleniowa › 30.15 Oświetlenie zewnętrzne › 30.15.41 Lampa tylna — Seria 447 (modele 6**, 7**)

AR72.20-S-1010E

Remove, install license plate lamp bracket

13.08.2014

MODEL

447.6/7

with CODE W50 (Rear-end door, double-wing, 180 degrees without window)

MODEL

447.6/7

with CODE W54 (Hinged rear doors, opening to side wall)

Remove, install license plate lamp bracket

S72.20-4651-08

1

License plate lamp bracket

5

Electrical connectors

2

Door foil

E19/3

Left rear-end door license plate lamp

3

Left rear door

E19/4

Right rear-end door license plate lamp

4

Nut

Remove, install license plate lamp bracket

S72.20-4677-08

Shown on MODEL 447.6 with CODE FR8 (Reversing camera)

1

License plate lamp bracket

6

Electrical connectors (with CODE FR8 (Reversing camera))

5

Electrical connectors

7

Reversing camera (with CODE FR8 (Reversing camera))

Danger !

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

No parts of the body or limbs should be within the operating area when the components are moving.

AS00.00-Z-0011-01A

Remove/install

1

Detach door foil (2) on left rear-end door (3) until nuts (4) are accessible

AR72.20-S-4100E

2

Separate electrical connections (6)

MODEL 447.6/7
with CODE FR8 (Rear view camera)
with CODE W50 (Rear-end door, double-wing, 180 degrees without window)
MODEL 447.6/7
with CODE FR8 (Rear view camera)
with CODE W54 (Hinged rear doors, opening to side wall)

3

Unscrew nuts (4)

4

Unclip license plate bracket (1) and guide to side until electrical connectors are accessible (5)

Long wedge

*115589035900

5

Unclip left rear-end door license plate lamp (E19/3) and right rear-end door license plate lamp (E19/4) and disconnect electrical connectors (5)

6

Unclip reversing camera (7) from license plate lamp bracket (1)

MODEL 447.6/7
with CODE FR8 (Rear view camera)
with CODE W50 (Rear-end door, double-wing, 180 degrees without window)
MODEL 447.6/7
with CODE FR8 (Rear view camera)
with CODE W54 (Hinged rear doors, opening to side wall)

7

Install in the reverse order

Check

8

Check function of left rear-end door license plate lamp (E19/3) and right rear-end door license plate lamp (E19/4)

9

Check reversing camera (7) for proper function

MODEL 447.6/7
with CODE FR8 (Rear view camera)
with CODE W50 (Rear-end door, double-wing, 180 degrees without window)
MODEL 447.6/7
with CODE FR8 (Rear view camera)
with CODE W54 (Hinged rear doors, opening to side wall)

Remove, install license plate lamp bracket

115 589 03 59 00

Long wedge

Powiązane dokumenty