Remove/install door sill molding on sliding door

AR68.30-S-1312E

Remove/install door sill molding on sliding door

25.11.15

Model

447, 448

Shown on model 447.8 with code C74 (Entry „Mercedes-Benz“ lettering illuminated)

1

Door sill

2

Electrical connector



Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

 

Remove/install

1

Detach sealing frame on corresponding sliding door in working area

 Installation: Ensure that sealing frame is seated correctly on sliding door.

2

Unclip door sill (1) starting at rear, pivot out below B-pillar paneling and remove

Model 447.8, 448.8
except code C74 (Illuminated Mercedes-Benz lettering on door sill)

 Installation: Ensure that door sill (1) is seated correctly.
Check mounting clips (arrows) for damage.

 Long wedge

*115589035900

If mounting clips are damaged



Replace corresponding mounting clips

3

Unclip door sill (1) starting at rear, pivot out below B-pillar paneling and lift until electrical connector (2) is accessible

Model 447.8, 448.8
with code C74 (Illuminated Mercedes-Benz lettering on door sill)

 Installation: Ensure that wiring harness and electrical connector (2) are routed correctly.
Ensure that door sill (1) is seated correctly.

 Long wedge

*115589035900

4

Disconnect electrical connector (2) and remove door sill (1)

Model 447.8, 448.8
with code C74 (Illuminated Mercedes-Benz lettering on door sill)

 Installation: Check mounting clips (arrows) for damage.

If mounting clips are damaged



Replace corresponding mounting clips

5

Install in the reverse order



Check

6

Check whether illumination of door sill (1) functions properly

Model 447.8, 448.8
with code C74 (Illuminated Mercedes-Benz lettering on door sill)