ar4330b0020a

Remove/install retarder oil temperature sensor

Type ar · emne 43.30 · versjon 0100 · 2020-08-25

Gjelder for: Model 384.076/078 with transmission 712.632, 715.062 with code B30 (Voith retarder 123)

Ikke tilgjengelig på «no»; vises på Engelsk.

Plassering

Funksjonsgruppe 2 Understell › 43 Bremsepneumatikk og tilleggsbremser › 43.30 Retarder (hydraulisk) — Serie 384 (modeller 076, 078)

EinPAS 21 Bremser/undertrykkssystem/trykkluftsystem › 21.21 Retarder › 21.21.12 Sensor/bryter/ledningsnett — Serie 384 (modeller 076, 078)

Gjelder også motorer/girkasser: 712 632, 715 062

AR43.30-B-0020A

Remove/install retarder oil temperature sensor

07.08.2020

Model	384.076/078 with transmission 712.632, 715.062
	with code B30 (Voith retarder 123)

Remove/install retarder oil temperature sensor

1	Retarder
2	Oil temperature sensor
3	Seal ring

B43.30-A004-06

 Warning	Risk of injury caused by touching hot retarder and by scalding from hot retarderoil. Risk of injury to skin or eyes caused by retarder oil escaping under high pressure	Do not carry out any work unless retarder is switched off. Wear suitable protective clothing and safety glasses when working on the hot retarder.	AS43.30-Z-0001-01A
 	Remove/install
1	Switch off vehicle ignition	 Make sure that the auxiliary brake activation (retarder) is in the "0" (zero) position.
2	Disconnect the electric cable from the oil temperature sensor (2)
3	Remove the oil temperature sensor (2) from the retarder housing	 Collect the drainage oil, if needed.
		 Installation: Replace the O-ring (3).
		 Oil temperature sensor	*BA43.30-B-1003-01F
4	Installation to be done in reverse order

 Retarder (hydraulic)

Number	Designation			Chassis 368.0/1, 382.1/2, 384.0/2/3, 6852, 693.0/1, 694.0, 695.0/3 - with Voith Retarder R123
BA43.30-B-1003-01F	Oil temperature sensor	M14x1,5	Nm	28

Refererte dokumenter

as4330z000101a