1 | Retarder |
2 | Silencer |
3 | Proportional valve |
4 | Upper cap |
5 | Air inlet and outlet valve |
6 | Proportional valve pressure sensor |
7 | Intake check valve |
8 | Pressure sensor |
B43.30-A003-12
1 | Retarder |
9 | Oil temperature sensor |
10 | Coolant temperature sensor |
B43.30-A002-12
| Disassemble/assemble | ||
Warning | Risk of injury caused by touching hot retarder and by scalding from hot retarderoil. Risk of injury to skin or eyes caused by retarder oil escaping under high pressure | Do not carry out any work unless retarder is switched off. Wear suitable protective clothing and safety glasses when working on the hot retarder. | |
1 | Remove the retarder (1) | ||
The retarder (1) must be transported and stored as determined by the manufacturer. | |||
2 | Remove the silencer (2) | ||
3 | Remove the proportional valve (3) | ||
4 | Remove the upper cover (4) | ||
5 | Remove air inlet and outlet valve (5) | ||
6 | Remove the coolant temperature sensor | ||
7 | Remove oil temperature sensor (9) | ||
8 | Remove the pressure sensor (8) | Air pressure sensor | |
9 | Remove the intake check valve (7) | ||
10 | Assemble in reverse order | ||
| Check | ||
11 | Check the components for wear and, if necessary, replace them |