AR83.30-D-6540B | Install/remove condenser | 16.2.12 |
MODEL 901.6, 902.6, 903.6, 904.6, 905.6 with CODE (HH9) Regulated air conditioning (Tempmatic)
MODEL 690.6 with CODE (HH9) Regulated air conditioning (Tempmatic)
D83.30-1102-06
1 Capacitor
2 Refrigerant line (refrigerant compressor/condenser)
3 Refrigerant line (condenser/fluid reservoir)
4 Lower half of holder
5 Additional fan
6 Upper half of holder
7 additional fan connector
Modification notes
18.7.01 | Value changed from 21 (2) Nm to 17 Nm | Value modified to BA83.30-N-1003-02A for model 690.6 with codes HH6, HH9; models 901.6, 902.6, 903.6, 904.6 |
| Remove/install | ||
Danger! | Risk of explosion caused by welding or soldering work on closed air conditioning system. Risk of poisoning caused by inhaling overheated refrigerant vapors. Risk of injury to skin and eyes caused by contact with liquid refrigerant. | Never perform welding work on or near a closed air conditioning system. No smoking or open flames. Wear safety glasses and protective gloves. Work only in well ventilated areas. Carry out repair work on the air conditioning system circuit only after the system has been discharged. | |
Danger! | Risk of explosion caused by escaping oxyhydrogen gas. Risk of injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte (contains diluted sulfuric acid) or metal spatter due to short circuit. Risk of burn injuries caused by short circuit. Risk of poisoning caused by swallowing battery electrolyte (contains diluted sulfuric acid) or absorption of lead over the skin or orifices | No fire, sparks, open flames or smoking. Wear acid-resistant gloves and clothing and safety glasses with side guards. Do not place any conductive objects on the battery and avoid any short circuit from battery positive to ground. Only fill liquid battery electrolyte (diluted sulfuric acid) into suitable and appropriately marked containers. | |
1 | Disconnect ground lead from battery | ||
| Notes on battery | All models | |
2 | Discharge air conditioning system | ||
| Protect air conditioning circuit and components from moisture when carrying out repair work | All models fitted with air conditioning | |
3 | Remove front bumper | ||
4 | Remove front grille | Model 901.6, 902.6, 903.6, 904.6, 905.6 up to model year 2003 Model 690.6 up to model year 2003 | |
Model 901.6, 902.6, 903.6, 904.6, 905.6 as of model year 2003 | |||
5 | Remove front end cross member | ||
6 | Disconnect refrigerant lines (2, 3) at the condenser (1) | Refrigerant line of condenser/fluid reservoir to condenser | |
7 | Disconnect additional fan connector (7). | ||
8 | Remove additional fan (5) together with upper holder (6) | ||
9 | Remove bottom bracket (4) | ||
10 | Disconnect condenser (1) from radiator | Installation: Top up compressor oil. Replace lower clips with clip fasteners. | |
| Compressor oils | Sheet 362.0 | |
11 | Install in the reverse order | ||
12 | Evacuate the air conditioning system, refill it, and then check the system to make sure that it functions correctly and does not leak. |
Refrigerant lines
참조 문서
- ah5410p000101a 배터리 관련 지침
- ah5410p000101a
- ah8330n000501a 정비 작업 시 에어컨의 회로와 부품들을 습기로부터 보호하십시오.
- ar8330d1760a
- ar8800d2115b
- ar8800d2115c
- ar8800d2302a
- ar8820d2000c
- as5410z000101a 단락 및 폭발성 기체 유출로 인한 화재/폭발 위험 배터리 전해액/증기, 단락 및 전기 아크에 노출 시 눈, 피부, 점막의 부식으로 인한 화상/상 해 위험 배터리 전해액을 삼키거나 피부
- as8300z000101a 밀폐된 에어컨에서 용접 작업이나 납땜 작업을 실행할 경우 발생할 수 있는 폭발 위험 과열된 냉매 증기의 흡입으로 인한 중독 위험 액체형 냉매와의 피부 및 안구 접촉에 의한 상�
- bb0040p036200a 컴프레서 오일(사양 362.0)