Removing and installing front bumper

유형 ar · 주제 88.20 · 버전 0105 · 2001-08-22

적용 대상: MODELS 901.6, 902.6, 903.6, 904.6, 905.6 MODEL 690.6

“ko”(으)로는 제공되지 않아 영어(으)로 표시합니다.

AR88.20-D-2000C

6.4.99

MODELS 901.6, 902.6, 903.6, 904.6, 905.6

MODEL 690.6

D88.20-0002-06

1 License plate

2 Rivet

3 Bolt

4 Bumper

5 Guide

6 Connector

7 Outside temperature sensor

 	Remove/install
1	Remove license plate (1)
2	Take off rivet (2) on left and right
3	Unscrew screws (3)	Installation: Replace micro-encapsulated screws
			*BA88.20-N-1001-01A
4	Pull bumper (4) forward out of the side guides (5)	Installation: Ensure that the bumper is correctly seated in the side guides
5	Unplug connector (6) from outside air temperature sensor (7)	 On vehicles with outside air temperature sensor
6	Install in the reverse order

 Bumper

Number	Designation		Models 690.6, 901, 902, 903, 904, 905


BA88.20-N-1001-01A	Collar screw of front bumper to body	Nm	23