ar8820d2000c

Removing and installing front bumper

Type ar · topic 88.20 · version 0105 · 2001-08-22

Applies to: MODELS 901.6, 902.6, 903.6, 904.6, 905.6 MODEL 690.6

Where it sits

Function group 3 Body › 88 Detachable body components, exterior flaps › 88.20 Bumpers — Series 690 (models 6**) · Series 901 (models 6**) · Series 902 (models 6**) · Series 903 (models 6**) · Series 904 (models 6**) · Series 905 (models 6**)

EinPAS 35 Body/frame/detachable parts › 35.38 Bumper/spoiler/outer trim/stowage box/front protective paneling › 35.38.30 Front bumper — Series 690 (models 6**) · Series 901 (models 6**) · Series 902 (models 6**) · Series 903 (models 6**) · Series 904 (models 6**) · Series 905 (models 6**)

AR88.20-D-2000C

Removing and installing front bumper

6.4.99

MODELS 901.6, 902.6, 903.6, 904.6, 905.6

MODEL 690.6

Removing and installing front bumper

D88.20-0002-06

1 License plate

2 Rivet

3 Bolt

4 Bumper

5 Guide

6 Connector

7 Outside temperature sensor

Remove/install

1

Remove license plate (1)

2

Take off rivet (2) on left and right

3

Unscrew screws (3)

Installation: Replace micro-encapsulated screws

*BA88.20-N-1001-01A

4

Pull bumper (4) forward out of the side guides (5)

Installation: Ensure that the bumper is correctly seated in the side guides

5

Unplug connector (6) from outside air temperature sensor (7)

On vehicles with outside air temperature sensor

6

Install in the reverse order

Bumper

Number

Designation

Models
690.6, 901, 902, 903, 904, 905

BA88.20-N-1001-01A

Collar screw of front bumper to body

Nm

23