ar8210p4730ee

Remove/install lamp unit

유형 ar · 주제 82.10 · 버전 0104 · 2019-12-05

적용 대상: Model 208

“ko”(으)로는 제공되지 않아 영어(으)로 표시합니다.

위치

기능 그룹 3 구조 › 82 전기적 장치, 구조 › 82.10 실외　조명 — 시리즈 208

EinPAS 30 조명 시스템 › 30.15 외부 조명 › 30.15.40 전방 램프 — 시리즈 208

AR82.10-P-4730EE

Remove/install lamp unit

20.11.2019

Model

208

Remove/install lamp unit

1

Bolts

2

Electrical connections

8

Nut

E1

Left lamp unit

E2

Right lamp unit

P82.10-0756-06

Remove/install

Danger

Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC)

Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines.

AS00.00-Z-0035-01A

Danger

Risk of explosion/risk of fire caused by highly flammable materials in the vicinity of damaged xenon bulbs. Risk of injury caused by UV light, hot components on xenon headlamps and glass splinters produced by bursting xenon bulbs. Risk of poisoning caused by inhalation of mercury vapors and by swallowing of/skin contact with toxic salts and mercury compounds.

Do not touch parts conducting high voltage. Persons with active electronic implants (e.g. cardiac pacemakers) must never work on xenon headlamps. Switch off the entire lighting system. Wear insulated safety shoes, safety glasses and protective gloves. Remove highly inflammable materials from the danger zone. Ensure sufficient ventilation in the working area.

AS82.10-Z-0001-01A

1

Disconnect battery ground line

AR54.10-P-0003A


On model 210 to prevent unintentional contact of disconnected ground line with ground point W10,
insulate cable lug of ground line.

2

Remove front bumper

AR88.20-P-2000K

3

Remove bolt (1)

4

Unscrew nut (8)

Installation:
Align lamp unit so that
the distances between the fender and the closed engine hood are equal.

5

Unclip headlamp cleaning system feed line under lamp unit

With code 600 (Headlamp cleaning system).

6

Carefully pull out lamp unit (E1 or E2) towards the front

7

Disconnect electrical connections (2) from lamp unit (E1 or E2)

8

Disconnect vacuum line (3) of headlamp range adjustment

With pneumatic headlamp range adjustment.

9

Install in the reverse order

10

Carry out function check of lamp unit

11

Check/correct headlamp adjustment

With pneumatic headlamp range adjustment.

Model 208

AP82.10-P-8260A

With lamp unit, code 612 (Xenon headlamps)
Program zero position via HHT

12

Perform functional check of headlamp cleaning system

With code 600 (Headlamp cleaning system).

참조 문서