Remove/install clock spring contact

AR46.10-P-0200RT

Remove/install clock spring contact

21.2.12

 

Remove/install

 Danger!

Risk of injury caused by performing testing or repair work on airbag or emergency tensioning retractor units.

Store airbag units with deployment side facing up; do not expose to temperatures greater than 100 °C. When working on these units, disconnect the power supply.

AS91.00-Z-0001-01A

 Danger!

Risk of explosion caused by escaping oxyhydrogen gas. Risk of injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte (contains diluted sulfuric acid) or metal spatter due to short circuit. Risk of burn injuries caused by short circuit. Risk of poisoning caused by swallowing battery electrolyte (contains diluted sulfuric acid) or absorption of lead over the skin or orifices

No fire, sparks, open flames or smoking.

Wear acid-resistant gloves and clothing and safety glasses with side guards.

Do not place any conductive objects on the battery and avoid any short circuit from battery positive to ground.

Only fill liquid battery electrolyte (diluted sulfuric acid) into suitable and appropriately marked containers.

AS54.10-Z-0001-01A

1

Disconnect battery ground cable

AR54.10-P-0003RT

2

Remove driver airbag unit

AR91.60-P-0660RT

3

Remove steering wheel

AR46.10-P-0100RT

4

Removing jacket tube module (N80)

AR54.25-P-2802RT

5

Remove bolts (1) and detach steering column module trim (2)

 Note installation position of end pieces.

 Installation: Insert end pieces in the original positions in the steering column module trim.

6

Remove bolts (3)

 Make sure that the release mechanism (4) of the clock spring contact (5) is not actuated during removal and installation. The clock spring contact (5) would be damaged if it were twisted.

7

Carefully detach clock spring contact (5) from steering column module (N80); disconnect electrical connectors (6, 7) when doing so

 Installation: Do not damage the electrical connector.

8

Install in the reverse order

9

Perform basic programming

AR00.19-P-0200RT