P46.10-2657-09
Shown on vehicle with electrically adjustable steering column, code 441
1 Bolts
2 Steering column module trim
3 Bolts
4 Release
5 Clock spring contact
6 Electrical connectors
7 Electrical connectors
N80 Steering column module
| Remove/install | ||
Danger! | Risk of injury caused by performing testing or repair work on airbag or emergency tensioning retractor units. | Store airbag units with deployment side facing up; do not expose to temperatures greater than 100 °C. When working on these units, disconnect the power supply. | |
Danger! | Risk of explosion caused by escaping oxyhydrogen gas. Risk of injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte (contains diluted sulfuric acid) or metal spatter due to short circuit. Risk of burn injuries caused by short circuit. Risk of poisoning caused by swallowing battery electrolyte (contains diluted sulfuric acid) or absorption of lead over the skin or orifices | No fire, sparks, open flames or smoking. Wear acid-resistant gloves and clothing and safety glasses with side guards. Do not place any conductive objects on the battery and avoid any short circuit from battery positive to ground. Only fill liquid battery electrolyte (diluted sulfuric acid) into suitable and appropriately marked containers. | |
1 | Disconnect battery ground cable | ||
2 | Remove driver airbag unit | ||
3 | Remove steering wheel | ||
4 | Removing jacket tube module (N80) | ||
5 | Remove bolts (1) and detach steering column module trim (2) | Note installation position of end pieces. | |
Installation: Insert end pieces in the original positions in the steering column module trim. | |||
6 | Remove bolts (3) | Make sure that the release mechanism (4) of the clock spring contact (5) is not actuated during removal and installation. The clock spring contact (5) would be damaged if it were twisted. | |
7 | Carefully detach clock spring contact (5) from steering column module (N80); disconnect electrical connectors (6, 7) when doing so | Installation: Do not damage the electrical connector. | |
8 | Install in the reverse order | ||
9 | Perform basic programming |
Referenced documents
- ar0019p0200rt Perform basic programming
- ar4610p0100rt Remove/install steering wheel
- ar5410p0003rt Disconnect/connect battery ground line
- ar5425p2802rt Remove/install steering column module
- ar9160p0660rt Remove/install airbag unit on steering wheel
- as5410z000101a Risk of fire/risk of explosion due to short circuit and escaping oxyhydrogen gas. Risk of (burn) injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte/mist, short circuit and arcing. Risk of
- as9100z000101a Risk of injury caused by performing testing or repair work on airbag or emergency tensioning retractor units.