ar3520s0115ef

Remove/install wheel carrier

유형 ar · 주제 35.20 · 버전 0201 · 2019-12-05

적용 대상: Model 447 with engine 622 Model 447 with engine 780.701/702

“ko”(으)로는 제공되지 않아 영어(으)로 표시합니다.

위치

기능 그룹 2 섀시 › 35 뒷차축 › 35.20 휠가이드, 허브 — 시리즈 447 · 시리즈 622

EinPAS 17 드라이브 트레인/액슬 › 17.51 뒤차축 › 17.51.41 휠 캐리어/스티어링 너클/휠 허브/휠 베어링 — 시리즈 447 · 시리즈 622

엔진/변속기에도 적용: 780 701, 780 702

AR35.20-S-0115EF

Remove/install wheel carrier

04.12.2019

Model

447 with engine 622

Model

447 with engine 780.701/702

Remove/install wheel carrier

1

Wheel carrier

2

Rear brake cable

3

Screw

4

Nuts

5

Wheel bearings

S35.20-4508-06

Danger

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

Remove/install

1

Remove left or right brake shoes of parking brake.

AR42.20-S-0530E

2

Remove left or right rear brake cable (2) from wheel carrier (1) and place to one side.

3

Remove rear axle rpm sensor from left or right wheel carrier (1) and place to one side with connected electric line.

AR42.30-S-0714E

4

Counterhold nuts (4) and remove screws (3).

Topical note

Notes on threaded connections fastened using a tightening angle-based tightening process

AH00.00-P-0020-01A

Topical note

Notes on self-locking nuts and bolts

AH00.00-N-0001-01A

Installation: Replace bolts (3) and nuts (4).

Screw/nut, wheel carrier to semi-trailing arm

*BA35.15-N-1005-03H

5

Remove wheel carrier(1).

The wheel carrier (1), wheel hub and wheel bearing (5) form a unit and can only be removed together.

6

Install in the reverse order.

Control arm

Number

Designation

Model 447, 448

BA35.15-N-1005-03H

Screw/nut, wheel carrier to semi-trailing arm

Stage 1

Nm

150

Stage 2

°

90

참조 문서